Heinz Werner Höppel

2024

• Arnoldt A., Österreicher JA., Schiffl A., Höppel HW.:
  Optimizing the Zn and Mg contents of Al–Zn–Mg wrought alloys for high strength and industrial-scale extrudability
  In: Journal of Materials Research and Technology 32 (2024), p. 2972-2982
  ISSN: 2238-7854
  DOI: 10.1016/j.jmrt.2024.08.014
• Dölling J., Kuglstatter M., Prahl U., Höppel HW., Ortner P., Ott B., Kracun SF., Fehlbier M., Zilly A.:
  Analyzing the Precipitation Effects in Low-Alloyed Copper Alloys Containing Hafnium and Chromium
  In: Metals 14 (2024), Article No.: 258
  ISSN: 2075-4701
  DOI: 10.3390/met14030258
• Dölling J., Kuglstatter M., Prahl U., Höppel HW., Ortner P., Ott B., Kracun SF., Fehlbier M., Zilly A.:
  Analyzing the Precipitation Effects in Low-Alloyed Copper Alloys Containing Hafnium and Chromium
  In: Metals 14 (2024), p. 258
  ISSN: 2075-4701
  DOI: 10.3390/met14030258
• Ernst B., Kubaschinski P., Schiessl A., Waltz M., Höppel HW., Tetzlaff U.:
  Comparison of the Young's modulus of the lead free solder alloy Sn-Ag3.8-Cu0.7 determined by hot tensile tests, ultrasonic measurements and β-Sn single crystal calculations
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 916 (2024), Article No.: 147354
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2024.147354
• Kuglstatter M., Nitschky M., Hartmann A., Kümmel F., Fecher J., Felfer P., Höppel HW., Göken M.:
  Adapting Conductivity and Mechanical Properties through Layer Thickness Variation in Copper Niobium Laminated Metallic Composites
  In: Advanced Engineering Materials (2024), Article No.: 2400266
  ISSN: 1438-1656
  DOI: 10.1002/adem.202400266
• Ortner P., Schiffl A., Höppel HW.:
  Influence of a Preageing Treatment on the Cluster Formation and the Further Ageing Route in Al–Mg–Si Extrusion Alloys
  In: Advanced Engineering Materials (2024)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202400623
• Schimbäck D., Kaserer L., Mair P., Mohebbi MS., Staron P., Maier-Kiener V., Letofsky-Papst I., Kremmer T., Palm F., Montes I., Höppel HW., Leichtfried G., Pogatscher S.:
  Advancements in metal additive manufacturing: In-situ heat treatment of aluminium alloys during the laser powder bed fusion process
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 905 (2024), Article No.: 146102
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2024.146102

2023

• Fuchs C., Elitzer D., Höppel HW., Göken M., Zaeh MF.:
  Investigation into the influence of the interlayer temperature on machinability and microstructure of additively manufactured Ti-6Al-4V
  In: Production Engineering (2023)
  ISSN: 0944-6524
  DOI: 10.1007/s11740-023-01192-9
• Goik P., Schiffl A., Höppel HW.:
  Formation of Peripheral Coarse Grain in Thin-Walled Al–Mg–Si Extrusion Profiles
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2023)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-023-07144-3
• Goik P., Schiffl A., Höppel HW., Göken M.:
  The Role of Through-Thickness Variation of Texture and Grain Size on Bending Ductility of Al–Mg–Si Profiles
  Light Metals Symposium held at the TMS Annual Meeting and Exhibition, TMS 2023 (San Diego, CA, USA, 19. March 2023 - 23. March 2023)
  In: Stephan Broek (ed.): Minerals, Metals and Materials Series 2023
  DOI: 10.1007/978-3-031-22532-1_77
• Palm MS., Diepold B., Neumeier S., Höppel HW., Göken M., Zaeh MF.:
  Detection and effects of lack of fusion defects in Hastelloy X manufactured by laser powder bed fusion
  In: Materials & Design 230 (2023), Article No.: 111941
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2023.111941
• Pohl P., Kuglstatter M., Göken M., Höppel HW.:
  Quantifying Co-Deformation Effects in Metallic Laminates by Loading–Unloading–Reloading Tensile Tests
  In: Metals 13 (2023), p. 1049
  ISSN: 2075-4701
  DOI: 10.3390/met13061049
• Risse JH., Trempa M., Huber F., Höppel HW., Bartels D., Schmidt M., Reimann C., Friedrich J.:
  Microstructure and Mechanical Properties of Hypereutectic Al-High Si Alloys up to 70 wt.% Si-Content Produced from Pre-Alloyed and Blended Powder via Laser Powder Bed Fusion
  In: Materials 16 (2023), p. 657
  ISSN: 1996-1944
  DOI: 10.3390/ma16020657

2022

• Arnoldt AR., Schiffl A., Höppel HW., Oesterreicher JA.:
  Influence of different homogenization heat treatments on the microstructure and hot flow stress of the aluminum alloy AA6082
  In: Materials Characterization 191 (2022)
  ISSN: 1044-5803
  DOI: 10.1016/j.matchar.2022.112129
• Diepold B., Schunk C., Kümmel F., Fey T., Prakash A., Höppel HW., Göken M.:
  Fatigue Life Optimized Layer Architecture of Ultrafine-Grained Al-Ti Laminates Under Bending Stresses
  In: Advanced Engineering Materials (2022)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202101143
• Elitzer D., Jäger S., Höll C., Baier D., Varga R., Zaeh MF., Göken M., Höppel HW.:
  Development of Microstructure and Mechanical Properties of TiAl6V4 Processed by Wire and Arc Additive Manufacturing
  In: Advanced Engineering Materials (2022)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202201025
• Höppel HW., May J., Eisenlohr P., Göken M.:
  Strain-rate sensitivity of ultrafine-grained materials
  In: International Journal of Materials Research 96 (2022), p. 566-571
  ISSN: 1862-5282
  DOI: 10.3139/ijmr-2005-0101
• Kümmel F., Magnier A., Wu T., Niendorf T., Höppel HW.:
  Residual Stresses in Ultrafine-Grained Laminated Metal Composites Analyzed by X-ray Diffraction and the Hole-Drilling Method
  In: Advanced Engineering Materials (2022)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202200274
• Taali S., Toroghinejad MR., Kuglstatter M., Höppel HW.:
  Grain boundary engineering in roll-bonded copper to overcome the strength-ductility dilemma
  In: Journal of Materials Research and Technology 17 (2022), p. 3198-3204
  ISSN: 2238-7854
  DOI: 10.1016/j.jmrt.2022.02.032

2021

• Diepold B., Neumeier S., Meermeier A., Höppel HW., Sebald T., Göken M.:
  Temperature-Dependent Dynamic Strain Aging in Selective Laser Melted 316L
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202001501
• Diepold B., Palm MS., Wimmer A., Sebald T., Höppel HW., Neumeier S., Göken M.:
  Rotating Scan Strategy Induced Anisotropic Microstructural and Mechanical Behavior of Selective Laser Melted Materials and Their Reduction by Heat Treatments
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202100622
• Kohlhepp M., Uggowitzer PJ., Hummel M., Höppel HW.:
  Formation of Die Soldering and the Influence of Alloying Elements on the Intermetallic Interface
  In: Materials 14 (2021), p. 1580
  ISSN: 1996-1944
  DOI: 10.3390/ma14071580
• Kümmel F., Höppel HW., Göken M.:
  Ultrafine-Grained Laminated Metal Composites: A New Material Class for Tailoring Cyclically Stressed Components
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202100070
• Matschkal D., Tuengerthal P., Lamm S., Göken M., Höppel HW., Felfer P.:
  Understanding the high creep resistance of mri 230d magnesium alloy through nanoindentation and atom probe tomography
  In: Metals 11 (2021), Article No.: 1727
  ISSN: 2075-4701
  DOI: 10.3390/met11111727
• Pohl P., Kümmel F., Schunk C., Serrano-Munoz I., Markötter H., Göken M., Höppel HW.:
  About the role of interfaces on the fatigue crack propagation in laminated metallic composites
  In: Materials 14 (2021), Article No.: 2564
  ISSN: 1996-1944
  DOI: 10.3390/ma14102564

2020

• Bach J., Stoiber M., Schindler L., Höppel HW., Göken M.:
  Deformation mechanisms and strain rate sensitivity of bimodal and ultrafine-grained copper
  In: Acta Materialia 186 (2020), p. 363-373
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2019.12.044
• Gulden F., Reinhold B., Gramstat S., Stich A., Tetzlaff U., Höppel HW.:
  Investigation of the run-in and corrosion behavior of a PEO-coated aluminum brake disc
  10th International Munich Chassis Symposium (Chassis.Tech Plus) (Munich)
  In: 10TH INTERNATIONAL MUNICH CHASSIS SYMPOSIUM 2019 (CHASSIS.TECH PLUS), WIESBADEN: 2020
  DOI: 10.1007/978-3-658-26435-2_43
• Höppel HW., Westermeyer M., Kümmel F., Göken M.:
  The Role of Interfaces on the Deformation Mechanisms in Bimodal Al Laminates Produced by Accumulative Roll Bonding
  In: Advanced Engineering Materials (2020)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202000145
• Kalsar R., Yadav D., Sharma A., Brokmeier HG., May J., Höppel HW., Skrotzki W., Suwas S.:
  Effect of Mg content on microstructure, texture and strength of severely equal channel angular pressed aluminium-magnesium alloys
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 797 (2020), Article No.: 140088
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2020.140088
• Wang YF., Huang CX., Fang XT., Höppel HW., Göken M., Zhu YT.:
  Hetero-deformation induced (HDI) hardening does not increase linearly with strain gradient
  In: Scripta Materialia 174 (2020), p. 19-23
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2019.08.022

2019

• Bachmaier A., Hohenwarter A., Höppel HW., Ivanisenko J.:
  Nanostructured Metallic Materials and Composites: Processes, Properties and Microstructures
  In: Advanced Engineering Materials 21 (2019), Article No.: ARTN 1801073
  ISSN: 1438-1656
  DOI: 10.1002/adem.201801073
• Glöckel F., Uggowitzer PJ., Felfer P., Pogatscher S., Höppel HW.:
  Influence of Zn and Sn on the precipitation behavior of new Al-Mg-Si alloys
  In: Materials 12 (2019), Article No.: 2547
  ISSN: 1996-1944
  DOI: 10.3390/ma12162547
• Guillonneau G., Wheeler JM., Wehrs J., Philippe L., Baral P., Höppel HW., Göken M., Michler J.:
  Determination of the true projected contact area by in situ indentation testing
  In: Journal of Materials Research 34 (2019), p. 2859-2868
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2019.236
• Schunk C., Nitschky M., Höppel HW., Göken M.:
  Superior Mechanical Properties of Aluminum-Titanium Laminates in Terms of Local Hardness and Strength
  In: Advanced Engineering Materials 21 (2019), Article No.: ARTN 1800546
  ISSN: 1438-1656
  DOI: 10.1002/adem.201800546
• Zhou H., Huang C., Sha X., Xiao L., Ma X., Höppel HW., Göken M., Wu X., Ameyama K., Han X., Zhu Y.:
  In-situ observation of dislocation dynamics near heterostructured interfaces
  In: Materials Research Letters 7 (2019), p. 376-382
  ISSN: 2166-3831
  DOI: 10.1080/21663831.2019.1616330

2018

• Bachmann J., Göken M., Höppel HW.:
  Fatigue of low alloyed carbon steels in the HCF/VHCF-regimes
  In: Hans-Jürgen Christ (ed.): Fatigue of Materials at Very High Numbers of Loading Cycles, Wiesbaden: Springer Spektrum, 2018, p. 1-23
  ISBN: 9783658245306
  DOI: 10.1007/978-3-658-24531-3_1
• Gulden F., Gramstat S., Stich A., Höppel HW., Tetzlaff U.:
  Properties and Limitation of an Oxide Coated Aluminum Brake Rotor
  In: SAE Technical Papers (2018), Article No.: 2018-01-1877
  ISSN: 0148-7191
  DOI: 10.4271/2018-01-1877
• Huang CX., Wang YF., Ma XL., Yin S., Höppel HW., Göken M., Wu XL., Gao HJ., Zhu YT.:
  Interface affected zone for optimal strength and ductility in heterogeneous laminate
  In: Materials Today 21 (2018), p. 713-719
  ISSN: 1369-7021
  DOI: 10.1016/j.mattod.2018.03.006
• Kümmel F., Diepold B., Prakash A., Höppel HW., Göken M.:
  Enhanced monotonic and cyclic mechanical properties of ultrafine-grained laminated metal composites with strong and stiff interlayers
  In: International Journal of Fatigue 116 (2018), p. 379-387
  ISSN: 0142-1123
  DOI: 10.1016/j.ijfatigue.2018.06.043
• Kümmel F., Diepold B., Sauer KF., Schunk C., Prakash A., Höppel HW., Göken M.:
  High Lightweight Potential of Ultrafine-Grained Aluminum/Steel Laminated Metal Composites Produced by Accumulative Roll Bonding
  In: Advanced Engineering Materials (2018)
  ISSN: 1438-1656
  DOI: 10.1002/adem.201800286
• Medvedev AE., Lapovok R., Koch E., Höppel HW., Göken M.:
  Optimisation of interface formation by shear inclination: Example of aluminium-cooper hybrid produced by ECAP with back-pressure
  In: Materials & Design 146 (2018), p. 142-151
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2018.03.021
• Medvedev AE., Lapovok R., Koch E., Höppel HW., Göken M.:
  Optimisation of interface formation by shear inclination: Example of aluminium-copper hybrid produced by ECAP with back-pressure
  In: Materials & Design 146 (2018), p. 142-151
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2018.03.021
• Merle B., Höppel HW.:
  Microscale High-Cycle Fatigue Testing by Dynamic Micropillar Compression Using Continuous Stiffness Measurement
  In: Experimental Mechanics 58 (2018), p. 465-474
  ISSN: 0014-4851
  DOI: 10.1007/s11340-017-0362-3
• Schunk C., Nitschky M., Höppel HW., Göken M.:
  Superior Mechanical Properties of Aluminum–Titanium Laminates in Terms of Local Hardness and Strength
  In: Advanced Engineering Materials (2018)
  ISSN: 1438-1656
  DOI: 10.1002/adem.201800546

2017

• Freund L., Giese S., Schwimmer D., Höppel HW., Neumeier S., Göken M.:
  High temperature properties and fatigue strength of novel wrought gamma/gamma' Co-base superalloys
  In: Journal of Materials Research 32 (2017), p. 4475-4482
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2017.315
• Gulden F., Höppel HW., Göken M., Stich A., Gramstat S.:
  Fundamental Investigations of Aluminium Matrix Composite Brake Rotors for the Use in Passenger Cars
  In: EuroBreak 2017 (EB2017-MDS-026) 2017
• Höppel HW.:
  Ultrafine-grained Metals
  MDPI Basel, 2017
  ISBN: 978-3-03842-524-3
• Höppel HW., Goik P., Krechel C., Göken M.:
  Ex and in situ investigations on the role of persistent slip bands and grain boundaries in fatigue crack initiation
  In: Journal of Materials Research 32 (2017), p. 4276-4286
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2017.313
• Kümmel F., Höppel HW., Göken M.:
  Layer architecture and fatigue life of ultrafine-grained laminated metal composites consisting of different aluminum alloys
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 702 (2017), p. 406-413
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2017.06.105
• Kümmel F., Tegtmeier TS., Höppel HW., Göken M.:
  Optimized layer architecture for an extended fatigue life of ultrafine-grained AA1050/AA5005 laminated metal composites
  In: IOP Conference Series: Materials Science and Engineering 194 (2017), p. 012036
  ISSN: 1757-8981
  DOI: 10.1088/1757-899X/194/1/012036
• Schwimmer D., Stich A., Höppel HW.:
  Possibilities for Improving the Heat Resistance of Cylinder Head Alloys based on AlSi7MgCu0.5 and AISi10MgCu0.5

2016

• Altieri-Weimar P., Yuan W., Annibale ES., Schoemaker S., Amberger D., Göken M., Höppel HW.:
  Reliability model of LED package regarding the fatigue behavior of gold wires
• Bach J., Möller J., Göken M., Bitzek E., Höppel HW.:
  On the transition from plastic deformation to crack initiation in the high- and very high-cycle fatigue regimes in plain carbon steels
  In: International Journal of Fatigue (2016)
  ISSN: 0142-1123
  DOI: 10.1016/j.ijfatigue.2016.04.003
  URL: http://www.sciencedirect.com/science/article/pii/S0142112316300512
• Kümmel F., Hausöl T., Höppel HW., Göken M.:
  Enhanced fatigue lives in AA1050A/AA5005 laminated metal composites produced by accumulative roll bonding
  In: Acta Materialia 120 (2016), p. 150-158
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2016.08.039
• Kümmel F., Kreuz M., Hausöl T., Höppel HW., Göken M.:
  Microstructure and Mechanical Properties of Accumulative Roll-Bonded AA1050A/AA5005 Laminated Metal Composites
  In: Metals 6 (2016)
  ISSN: 2075-4701
  DOI: 10.3390/met6030056
• Ma X., Huang C., Moering J., Ruppert M., Höppel HW., Göken M., Narayan J., Zhu Y.:
  Mechanical properties of copper/bronze laminates: Role of interfaces
  In: Acta Materialia 116 (2016), p. 43-52
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2016.06.023
• Nguyen H., Boehm W., Tsoupis I., Göken M., Höppel HW., Schmidt C., Hausöl T., Ruppert M., Merklein M.:
  Tailored heat treated accumulative roll bonded aluminum blanks: failure under bending stresses
  In: Production Engineering 10 (2016), p. 399-407
  ISSN: 0944-6524
  DOI: 10.1007/s11740-016-0685-4
• Ruppert M., Schunk C., Hausmann D., Höppel HW., Göken M.:
  Global and local strain rate sensitivity of bimodal Al-laminates produced by accumulative roll bonding
  In: Acta Materialia 103 (2016), p. 643-650
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2015.11.009

2015

• Amberger D., Blickle T., Höppel HW., Göken M.:
  Fatigue behavior of calcium containing AZ91 magnesium alloys
  In: MP Materials Testing 57 (2015), p. 126-130
  ISSN: 0025-5300
  DOI: 10.3139/120.110694
• Höppel HW.:
  Ultrafine-Grained Metals
  In: Metals 5 (2015), p. 2393-2396
  ISSN: 2075-4701
• Prakash A., Nöhring WG., Lebensohn RA., Höppel HW., Bitzek E.:
  A multiscale simulation framework of the accumulative roll bonding process accounting for texture evolution
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 631 (2015), p. 104-119
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2015.02.005
• Ruppert M., Freund L., Wenzl T., Höppel HW., Göken M.:
  Ultrafine-grained austenitic stainless steels X4CrNi18-12 and X8CrMnNi19-6-3 produced by accumulative roll bonding
  In: Metals 5 (2015), p. 730-742
  ISSN: 2075-4701
  DOI: 10.3390/met5020730
• Ruppert M., Strebl M., Höppel HW., Göken M.:
  Mechanical properties of ultrafine-grained AlZnMg(Cu)-alloys AA7020 and AA7075 processed by accumulative roll bonding
  In: Journal of Materials Science 50 (2015), p. 4422-4429
  ISSN: 0022-2461
  DOI: 10.1007/s10853-015-9008-y

2014

• Bach J., Höppel HW., Prell M., Göken M.:
  Crack initiation mechanisms in AA6082 fatigued in the VHCF-regime
  In: International Journal of Fatigue 60 (2014), p. 23-27
  ISSN: 0142-1123
  DOI: 10.1016/j.ijfatigue.2013.08.018
• Bösch D., Pogatscher S., Hummel M., Fragner W., Uggowitzer PJ., Göken M., Höppel HW.:
  Secondary Al-Si-Mg High-pressure Die Casting Alloys with Enhanced Ductility
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 46 (2014), p. 1035-1045
  ISSN: 1073-5623
  DOI: 10.1007/s11661-014-2700-8
• Fragner W., Baumgartner K., Suppan H., Hummel M., Bösch D., Höppel HW., Uggowitzer PJ.:
  Using scrap in recycling alloys for structural applications in the automotive industry
  Light Metals 2014 - TMS 2014 Annual Meeting and Exhibition (San Diego, CA)
  URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-84899827386∨igin=inward
• Fried M., Krechel C., Affeldt EE., Eckert B., Kimmig S., Retze U., Höppel HW., Göken M.:
  Fatigue crack initiation in nickel-based superalloys studied by microstructure-based FE modeling and scanning electron microscopy
  In: MATEC Web of Conferences 14 (2014)
  ISSN: 2261-236X
  DOI: 10.1051/matecconf/20141416001
• Marr T., Freudenberger J., Maier V., Höppel HW., Göken M., Schultz L.:
  The Strengthening Effect of Phase Boundaries in a Severely Plastically Deformed Ti-Al Composite Wire
  In: Metals 4 (2014), p. 37-54
  ISSN: 2075-4701
  DOI: 10.3390/met4010037
• Ruppert M., Höppel HW., Göken M.:
  Influence of cross-rolling on the mechanical properties of an accumulative roll bonded aluminum alloy AA6014
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 597 (2014), p. 122-127
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2013.12.075

2013

• Amberger D., Blickle T., Höppel HW., Göken M.:
  Fatigue Behavior of Calcium Containing AZ91 Magnesium Alloys
  In: T. Beck , E. Charkaluk E. (ed.): Proceedings of the 7th International Conference on Low Cycle Fatigue 2013
  DOI: 10.3139/120.110694
• Bach J., Göken M., Bitzek E., Höppel HW.:
  Influence of specimen geometry on temperature increase during ultrasonic fatigue testing
  In: Ultrasonics 53 (2013), p. 1412-1416
  ISSN: 1874-9968
  DOI: 10.1016/j.ultras.2013.04.021
• Bach J., Höppel HW., Bitzek E., Göken M.:
  Influence of specimen geometry on temperature increase during ultrasonic fatigue testing
  In: Ultrasonics 53 (2013), p. 1412-1416
  ISSN: 0041-624X
  DOI: 10.1016/j.ultras.2013.04.021
• Bach J., Höppel HW., Bitzek E., Göken M.:
  Influence of specimen geometry on temperature increase during ultrasonic fatigue testing
  In: Ultrasonics 53 (2013), p. 1412-1416
  ISSN: 0041-624X
  DOI: 10.1016/j.ultras.2013.04.021
• Bach J., Liebig JP., Höppel HW., Blum W.:
  Influence of grain boundaries on the deformation resistance: Insights from an investigation of deformation kinetics and microstructure of copper after predeformation by ECAP
  In: Philosophical Magazine 93 (2013), p. 4331-4354
  ISSN: 0031-8086
  DOI: 10.1080/14786435.2013.828161
• Chekhonin P., Scharnweber J., Scharnweber M., Oertel C-., Hausöl T., Höppel HW., Jaschinski J., Marr T., Skrotzki W.:
  Mechanical properties of aluminium laminates produced by accumulative roll bonding
  In: Crystal Research and Technology 48 (2013), p. 532-537
  ISSN: 0232-1300
  DOI: 10.1002/crat.201300121
• Göken M., Hausöl T., Höppel HW.:
  Fatigue Life, Cyclic Deformation Behaviour and Damage Mechanisms of Ultrafine-Grained AA5754 Aluminum Alloy Produced by Accumulative Roll Bonding
  In: T. Beck , E. Charkaluk E. (ed.): Proceedings of the 7th International Conference on Low Cycle Fatigue 2013
• Hoi Pang Ng ., Przybilla T., Schmidt C., Lapovok R., Orlov D., Höppel HW., Göken M.:
  Asymmetric accumulative roll bonding of aluminium-titanium composite sheets
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 576 (2013), p. 306-315
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2013.04.027
• Hoi Pang Ng ., Przybilla T., Schmidt C., Lapovok R., Orlov D., Höppel HW., Göken M.:
  Asymmetric accumulative roll bonding of aluminium–titanium composite sheets
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 576 (2013), p. 306-315
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2013.04.027
• Kommer M., Schwub S., Göken M., Höppel HW., Freudenberger J.:
  Cyclic Deformation Behaviour and Damage Mechanisms in CuAgZr Alloys
  In: T. Beck , E. Charkaluk E. (ed.): Proceedings of the 7th International Conference on Low Cycle Fatigue 2013
• Kurtovic A., Niendorf T., Hausöl T., Höppel HW., Göken M., Maier HJ.:
  Surface strain evolution of ultrafine-grained aluminum alloy laminates under tension-Microscale plastic instabilities and the Portevin-Le Chatelier effect
  In: Scripta Materialia 68 (2013), p. 809-812
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2013.01.036
• Kurtovic A., Niendorf T., Hausöl T., Höppel HW., Göken M., Maier HJ.:
  Surface strain evolution of ultrafme-grained aluminum alloy laminates under tension - Microscale plastic instabilities and the Portevin-Le Chatelier effect
  In: Scripta Materialia 68 (2013), p. 809-812
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2013.01.036
• Niendorf T., Boehner A., Höppel HW., Göken M., Valiev RZ., Maier HJ.:
  Comparison of the monotonic and cyclic mechanical properties of ultrafine-grained low carbon steels processed by continuous and conventional equal channel angular pressing
  In: Materials & Design 47 (2013), p. 138-142
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2012.12.025
• Ruppert M., Böhm W., Nguyen H., Höppel HW., Merklein M., Göken M.:
  Influence of upscaling accumulative roll bonding on the homogeneity and mechanical properties of AA1050A
  In: Journal of Materials Science 48 (2013), p. 8377-8385
  ISSN: 0022-2461
  DOI: 10.1007/s10853-013-7648-3

2012

• Boehner A., Niendorf T., Amberger D., Höppel HW., Göken M., Maier HJ.:
  Martensitic transformation in ultrafine-grained stainless steel AISI 304l under monotonic and cyclic loading
  In: Metals 2 (2012), p. 56-64
  ISSN: 2075-4701
  DOI: 10.3390/met2010056
• Böhner A., Höppel HW., May J., Göken M.:
  Influence of the ECAP processing parameters on the cyclic deformation behavior on ultrafine-grained cubic face centered metals
  In: Advanced Engineering Materials 14 (2012), p. 842-847
  ISSN: 1438-1656
  DOI: 10.1002/adem.201100217
• Chekhonin P., Beausir B., Scharnweber J., Oertel CG., Hausöl T., Höppel HW., Brokmeier HG., Skrotzki W.:
  Confined recrystallization of high-purity aluminium during accumulative roll bonding of aluminium laminates
  In: Acta Materialia 60 (2012), p. 4661-4671
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2012.04.004
• Chekhonin P., Beausir B., Scharnweber J., Oertel CG., Jaschinski J., Hausöl T., Höppel HW., Brokmeier HG., Skrotzki W.:
  Mechanical anisotropy of aluminium laminates produced by ARB
  In: Materials Science Forum 702-703 (2012), p. 151-156
  ISSN: 0255-5476
  DOI: 10.4028/www.scientific.net/MSF.702-703.151
• Göken Mathias, Höppel Heinz Werner, Hausöl Tina, Bach Jochen, Maier Verena, Schmidt Christian W., Amberger Dorothea:
  Grain refinement and deformation mechanisms in heterogeneous ultrafine-grained materials processed by accumulative roll bonding
  Proceedings of the 33rd Risø International Symposium on Materials Science
  In: Nanometals - status and perspective 2012
• Göken M., Höppel HW., Hausöl T., Bach J., Maier V., Schmidt C., Amberger D.:
  GRAIN REFINEMENT AND DEFORMATION MECHANISMS IN HETEROGENEOUS ULTRAFINE-GRAINED MATERIALS PROCESSED BY ACCUMULATIVE ROLL BONDING
• Hausöl T., Höppel HW., Göken M.:
  Ultrafine-grained AA6014/AA5754 laminates produced by accumulative roll bonding (ARB)
  In: Materialwissenschaft und Werkstofftechnik 43 (2012), p. 334-339
  ISSN: 0933-5137
  DOI: 10.1002/mawe.201200950
• Hausöl T., Schmidt C., Maier V., Böhm W., Nguyen MH., Merklein M., Höppel HW., Göken M.:
  Formability of ultrafine-grained AA6016 sheets processed by accumulative roll bonding
  In: Key Engineering Materials 504-506 (2012), p. 575-580
  ISSN: 1013-9826
  DOI: 10.4028/www.scientific.net/KEM.504-506.575
• Höppel HW., Pippan R., Motz C., Le Bourhis E.:
  Nanostructured materials
  In: Advanced Engineering Materials 14 (2012)
  ISSN: 1438-1656
  DOI: 10.1002/adem.201200306
• Höppel HW., Pippan R., Motz C., Le Bourhis E.:
  Nanostructured Materials
  In: Advanced Engineering Materials 14 (2012), p. 941-941
  ISSN: 1438-1656
  DOI: 10.1002/adem.201200306
• Maier V., Hausöl T., Schmidt C., Böhm W., Hung Nguyen ., Merklein M., Höppel HW., Göken M.:
  Tailored heat treated accumulative roll bonded aluminum blanks: Microstructure and mechanical behavior
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 43 (2012), p. 3097-3107
  ISSN: 1073-5623
  DOI: 10.1007/s11661-012-1151-3
• Schaufler J., Durst K., Haas T., Nolte R., Höppel HW., Göken M.:
  The influence of hydrogenated amorphous carbon coatings (a-C:H) on the fatigue life of coated steel specimens
  In: International Journal of Fatigue 37 (2012), p. 1-7
  ISSN: 0142-1123
  DOI: 10.1016/j.ijfatigue.2011.09.008
• Schmidt C., Ruppert M., Höppel HW., Nachtrab F., Dietrich A., Hanke R., Göken M.:
  Design of graded materials by particle reinforcement during accumulative roll bonding
  In: Advanced Engineering Materials 14 (2012), p. 1009-1017
  ISSN: 1438-1656
  DOI: 10.1002/adem.201200046
• Yasir M., Mori G., Wieser H., Reller A., Höppel HW.:
  Study of sensitization and different heating cycles on stainless steels used for automotive exhaust components
  In: Materials and Corrosion-Werkstoffe und Korrosion 63 (2012), p. 763-776
  ISSN: 0947-5117
  DOI: 10.1002/maco.201106255

2011

• Boehner A., Maier V., Durst K., Höppel HW., Göken M.:
  Macro- and nanomechanical properties and strain rate sensitivity of accumulative roll bonded and equal channel angular pressed ultrafine-grained materials
  In: Advanced Engineering Materials 13 (2011), p. 251-255
  ISSN: 1438-1656
  DOI: 10.1002/adem.201000270
• Göken M., Höppel HW.:
  Fatigue behaviour in nanostructured metals
  Elsevier Ltd., 2011
  ISBN: 9781845696702
  DOI: 10.1533/9780857091123.3.507
• Göken M., Höppel HW.:
  Tailoring nanostructured, graded, and particle-reinforced Al laminates by accumulative roll bonding
  In: Advanced Materials 23 (2011), p. 2663-2668
  ISSN: 0935-9648
  DOI: 10.1002/adma.201100407
• Hausöl T., Höppel HW., Göken M.:
  Microstructure and mechanical properties of accumulative roll bonded AA6014/AA5754 aluminium laminates
  In: Materials Science Forum 667-669 (2011), p. 217-222
  ISSN: 0255-5476
  DOI: 10.4028/www.scientific.net/MSF.667-669.217
• Höppel HW., Göken M., May L., Prell M.:
  Influence of grain size and precipitation state on the fatigue lives and deformation mechanisms of CP aluminium and AA6082 in the VHCF-regime
  33 (2011), p. 10-18
  ISSN: 0142-1123
  DOI: 10.1016/j.ijfatigue.2010.04.013
• Höppel HW., Kriebel F., Lapovok R., Boehner A., Göken M.:
  Influence of backpressure during ECAP on the monotonic and cyclic deformation behavior of AA5754 and Cu99.5
  13 (2011), p. 269-274
  ISSN: 1438-1656
  DOI: 10.1002/adem.201000269
• Korn M., Lapovok R., Böhner A., Höppel HW., Mughrabi H.:
  Bimodal grain size distributions in UFG materials produced by SPD - Their evolution and effect on the fatigue and monotonic strength properties
  In: Kovove Materialy-Metallic Materials 49 (2011), p. 51-63
  ISSN: 0023-432X
  DOI: 10.4149/km-2011-1-51
• Maier V., Durst K., Müller J., Backes B., Höppel HW., Göken M.:
  Nanoindentation strain-rate jump tests for determining the local strain-rate sensitivity in nanocrystalline Ni and ultrafine-grained Al
  In: Journal of Materials Research 26 (2011), p. 1421-1430
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2011.156
• Schmidt C.W., Knödler P., Höppel H.W., Göken M.:
  Particle based alloying by accumulative roll bonding in the system Al-Cu
  In: Metals 1 (2011), p. 65-78
  ISSN: 2075-4701
  DOI: 10.3390/met1010065
• Schmidt C., Höppel HW., Göken M.:
  Maßgeschneiderte partikelverstärkte Verbundwerkstoffe und Werkstoffverbunde hergestellt durch den akkumulativen Walzprozess (ARB)
  18. Symposium Verbundwerkstoffe
  In: Tagungsband zum 18. Symposium Verbundwerkstoffe 2011
• Schmidt C., Knieke C., Maier V., Höppel HW., Peukert W., Göken M.:
  Accelerated grain refinement during accumulative roll bonding by nanoparticle reinforcement
  In: Scripta Materialia 64 (2011), p. 245--248
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2010.10.013
• Schmidt C., Knieke C., Maier V., Höppel HW., Peukert W., Göken M.:
  Influence of Nanoparticle Reinforcement on the Mechanical Properties of Ultrafine-Grained Aluminium Produced by ARB
  In: Materials Science Forum 667-669 (2011), p. 725--730
  ISSN: 0255-5476
  DOI: 10.4028/www.scientific.net/MSF.667-669.725
• Schwarz W., Schwub S., Quering K., Wiedmann D., Höppel HW., Göken M.:
  Life prediction of thermally highly loaded components: Modelling the damage process of a rocket combustion chamber hot wall
  In: CEAS Space Journal 1 (2011), p. 83-97
  ISSN: 1868-2502
  DOI: 10.1007/s12567-011-0007-9

2010

• Brunner J., May J., Höppel HW., Göken M., Virtanen S.:
  Localized corrosion of ultrafine-grained Al-Mg model alloys
  In: Electrochimica Acta 55 (2010), p. 1966-1970
  ISSN: 0013-4686
  DOI: 10.1016/j.electacta.2009.11.016
• Hausöl T., Höppel HW., Göken M.:
  Microstructure and mechanical properties of accumulative roll bonded aluminium alloy AA5754
  In: Journal of Physics: Conference Series 240 (2010), Article No.: 012128
  ISSN: 1742-6588
  DOI: 10.1088/1742-6596/240/1/012128
• Hausöl T., Höppel HW., Göken M.:
  Tailoring materials properties of UFG aluminium alloys by accumulative roll bonded sandwich-like sheets
  In: Journal of Materials Science 45 (2010), p. 4733-4738
  ISSN: 0022-2461
  DOI: 10.1007/s10853-010-4678-y
• Hausöl T., Maier V., Schmidt C., Winkler M., Höppel HW., Göken M.:
  Tailoring materials properties by accumulative roll bonding
  In: Advanced Engineering Materials 12 (2010), p. 740-746
  ISSN: 1438-1656
  DOI: 10.1002/adem.201000044
• Höppel HW., Korn M., Lapovok R., Mughrabi H.:
  Bimodal grain size distributions in UFG materials produced by SPD: Their evolution and effect on mechanical properties
  DOI: 10.1088/1742-6596/240/1/012147
• Höppel HW., Prell M., May L., Göken M.:
  Influence of grain size and precipitates on the fatigue lives and deformation mechanisms in the VHCF-regime
  In: Procedia Engineering 2 (2010), p. 1025-1034
  ISSN: 1877-7058
  DOI: 10.1016/j.proeng.2010.03.111
• Maier V., Höppel HW., Göken M.:
  Nanomechanical behaviour of Al-Ti layered composites produced by accumulative roll bonding
  In: Journal of Physics: Conference Series 240 (2010), Article No.: 012108
  ISSN: 1742-6588
  DOI: 10.1088/1742-6596/240/1/012108
• Mughrabi H., Höppel HW.:
  Cyclic deformation and fatigue properties of very fine-grained metals and alloys
  In: International Journal of Fatigue 32 (2010), p. 1413-1427
  ISSN: 0142-1123
  DOI: 10.1016/j.ijfatigue.2009.10.007
• Scharnweber J., Skrotzki W., Oertel CG., Brokmeier HG., Höppel HW., Topic I., Jaschinski J.:
  Texture, microstructure and mechanical properties of ultrafine grained aluminum produced by accumulative roll bonding
  In: Advanced Engineering Materials 12 (2010), p. 989-994
  ISSN: 1438-1656
  DOI: 10.1002/adem.201000067
• Skrotzki W., Scharnweber J., Oertel C-., Höppel HW., Topic I., Brokmeier H-., Jaschinski J.:
  Plastic anisotropy of ultrafine grained Al alloy AA6016 produced by accumulative roll bonding
  In: Solid State Phenomena 160 (2010), p. 171-176
  ISSN: 1012-0394
  DOI: 10.4028/www.scientific.net/SSP.160.171
• Vevecka-Priftaj A., Höppel HW., Göken M.:
  Deformation behaviour of nanocrystalline al alloy, processed by severe plastic deformation
  7th International Conference of the Balkan Physical Union (Alexandroupolis)
  DOI: 10.1063/1.3322399

2009

• Höppel HW., Mughrabi H., Vinogradov A.:
  Fatigue Properties of Bulk Nanostructured Materials
  John Wiley and Sons, 2009
  ISBN: 9783527315246
  DOI: 10.1002/9783527626892.ch22
• Saitova LR., Höppel HW., Göken M., Semenova IP., Raab GI., Valiev RZ.:
  Fatigue behavior of ultrafine-grained Ti-6Al-4V 'ELI' alloy for medical applications
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 503 (2009), p. 145-147
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2008.04.082
• Saitova LR., Höppel HW., Göken M., Semenova IP., Raab GI., Valiev RZ.:
  Fatigue behavior of ultrafine-grained Ti-6Al-4V 'ELI' alloy for medical applications
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 503 (2009), p. 145-147
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2008.04.082
• Saitova LR., Höppel HW., Göken M., Semenova IP., Valiev RZ.:
  Cyclic deformation behavior and fatigue lives of ultrafine-grained Ti-6AL-4V ELI alloy for medical use
  In: International Journal of Fatigue 31 (2009), p. 322-331
  ISSN: 0142-1123
  DOI: 10.1016/j.ijfatigue.2008.08.007
• Saitova LR., Höppel HW., Göken M., Semenova IP., Valiev RZ.:
  Cyclic deformation behavior and fatigue lives of ultrafine-grained Ti-6AL-4V ELI alloy for medical use
  In: International Journal of Fatigue 31 (2009), p. 322-331
  ISSN: 0142-1123
  DOI: 10.1016/j.ijfatigue.2008.08.007
• Saitova LR., Höppel HW., Göken M., Semenova IP., Valiev RZ.:
  Cyclic deformation behavior and fatigue lives of ultrafine-grained Ti-6AL-4V ELI alloy for medical use
  In: International Journal of Fatigue 31 (2009), p. 322-331
  ISSN: 0142-1123
  DOI: 10.1016/j.ijfatigue.2008.08.007
• Topic I., Höppel HW., Göken M.:
  Friction stir welding of accumulative roll-bonded commercial-purity aluminium AA1050 and aluminium alloy AA6016
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 503 (2009), p. 163-166
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2007.12.057

2008

• Dinkel M., Pyczak F., May J., Höppel HW., Göken M.:
  XRD profile analysis characterization of ultrafine grained Al-Mg alloys
  In: Journal of Materials Science 43 (2008), p. 7481-7487
  ISSN: 0022-2461
  DOI: 10.1007/s10853-008-2859-8
• Hueller M., Vlcek J., Dinkel M., Höppel HW., Göken M.:
  Hardening and thermal stability of nanocrystalline AlMg4.8 powder
  In: Philosophical Magazine 88 (2008), p. 1209-1226
  ISSN: 0031-8086
  DOI: 10.1080/14786430802089854
• Höppel HW., May J., Göken M.:
  Cyclic deformation behaviour and fatigue lives of ultrafine-grained aluminium-magnesium alloys
  4th International Conference on Nanomaterials by Severe Plastic Deformation (, 18. August 2008 - 22. August 2008)
  In: Materials Science Forum 2008
  DOI: 10.4028/www.scientific.net/msf.584-586.840
• May J., Amberger D., Dinkel M., Höppel HW., Göken M.:
  Monotonic and cyclic deformation behaviour of ultrafine-grained aluminium
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 483-484 (2008), p. 481-484
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2006.12.177
• Mughrabi H., Höppel HW.:
  Assessment of fatigue damage in heterogeneous materials by application of a novel compliancen technique
  In: Solid Mechanics and Its Applications 152 (2008), p. 327-343
  ISSN: 0925-0042
  DOI: 10.1007/978-1-4020-8520-8-12
• Saitova L., Semenova I., Höppel HW., Valiev R., Göken M.:
  Enhanced superplastic deformation behavior of ultrafine-grained Ti-6Al-4V alloy
  In: Materialwissenschaft und Werkstofftechnik 39 (2008), p. 367-370
  ISSN: 0933-5137
  DOI: 10.1002/mawe.200800308
• Saitova LR., Höppel HW., Göken M., Kilmametov AR., Semenova IP., Valiev RZ.:
  Cycling of ultrafine-grained Ti-6Al-4V ELI alloy: Microstructural changes and enhanced fatigue limit
  4th International Conference on Nanomaterials by Severe Plastic Deformation (Goslar, 18. August 2008 - 22. August 2008)
  DOI: 10.4028/www.scientific.net/msf.584-586.827
• Skrotzki W., Hünsche I., Hüttenrauch J., Oertel CG., Brokmeier HG., Höppel HW., Topic I.:
  Texture and mechanical anisotropy of ultrafine-grained aluminum alloy AA6016 produced by accumulative roll bonding
  In: Texture, Stress, and Microstructure 2008 (2008)
  ISSN: 1687-5397
  DOI: 10.1155/2008/328754
• Topic I., Höppel HW., Göken M.:
  Deformation behaviour of accumulative roll bonded and friction stir welded aluminium alloys
  4th International Conference on Nanomaterials by Severe Plastic Deformation (DEU, 18. August 2008 - 22. August 2008)
  In: Materials Science Forum 2008
  DOI: 10.4028/www.scientific.net/msf.584-586.833
• Topic I., Höppel HW., Göken M.:
  Influence of rolling direction on strength and ductility of aluminium and aluminium alloys produced by accumulative roll bonding
  In: Journal of Materials Science 43 (2008), p. 7320-7325
  ISSN: 0022-2461
  DOI: 10.1007/s10853-008-2754-3
• Topic I., Höppel HW., Staud D., Merklein M., Geiger M., Göken M.:
  Formability of accumulative roll bonded aluminum AA1050 and AA6016 investigated using bulge tests
  In: Advanced Engineering Materials 10 (2008), p. 1101-1109
  ISSN: 1438-1656
  DOI: 10.1002/adem.200800167
• Vevecka-Priftaj A., Böhner A., May J., Höppel HW., Göken M.:
  Strain rate sensitivity of ultrafine grained aluminium alloy AA6061
  4th International Conference on Nanomaterials by Severe Plastic Deformation (Goslar, 18. August 2008 - 22. August 2008)
  DOI: 10.4028/www.scientific.net/msf.584-586.741

2007

• Hübner P., Kiessling R., Biermann H., Hinkel T., Jungnickel W., Kawalla R., Höppel HW., May J.:
  Static and cyclic crack growth behavior of ultrafine-grained Al produced by different severe plastic deformation methods
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 38 (2007), p. 1926-1933
  ISSN: 1073-5623
  DOI: 10.1007/s11661-007-9297-0
• Li Y., Müller J., Höppel HW., Göken M., Blum W.:
  Deformation kinetics of nanocrystalline nickel
  In: Acta Materialia 55 (2007), p. 5708-5717
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2007.06.036
• Maier HJ., Biallas G., Eggeler G., Estrin J., Hellmig RJ., Göken M., Höppel HW., Gottstein G., Winning M.:
  Symposium on ultrafine-grained materials: From basics to applications
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 38 (2007), p. 1881
  ISSN: 1073-5623
  DOI: 10.1007/s11661-007-9300-9
• May J., Dinkel M., Amberger D., Höppel HW., Göken M.:
  Mechanical properties, dislocation density and grain structure of ultrafine-grained aluminum and aluminum-magnesium alloys
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 38 (2007), p. 1941-1945
  ISSN: 1073-5623
  DOI: 10.1007/s11661-007-9110-0
• Ndlovu S., Durst K., Höppel HW., Göken M.:
  Study on the local damage mechanisms in WC-Co hard metals during scratch testing
  In: Materials Research Society Symposium - Proceedings 1049 (2007), Article No.: 1049-AA05-16
  ISSN: 0272-9172
  DOI: 10.1557/PROC-1049-AA05-16
• Topic I., Höppel HW., Göken M.:
  Deformation behaviour, microstructure and processing of accumulative roll bonded aluminium alloy AA6016
  In: International Journal of Materials Research 98 (2007), p. 320-324
  ISSN: 1862-5282
  DOI: 10.3139/146.101469
• Valiev RZ., Zehetbauer MJ., Estrin Y., Höppel HW., Ivanisenko Y., Hahn H., Wilde G., Roven HJ., Sauvage X., Langdon TG.:
  The innovation potential of bulk nanostructured materials
  In: Advanced Engineering Materials 9 (2007), p. 527-533
  ISSN: 1438-1656
  DOI: 10.1002/adem.200700078

2006

• Höppel HW.:
  Mechanical Properties of Ultrafine Grained Metals under Cyclic and Monotonic Loads: An Overview
  In: Materials Science Forum 503-504 (2006), p. 259-266
  ISSN: 0255-5476
  DOI: 10.4028/www.scientific.net/MSF.503-504.259
• Höppel HW., Kautz M., Xu C., Murashkin M., Langdon TG., Valiev RZ., Mughrabi H.:
  An overview: Fatigue behaviour of ultrafine-grained metals and alloys
  In: International Journal of Fatigue 28 (2006), p. 1001-1010
  ISSN: 0142-1123
  DOI: 10.1016/j.ijfatigue.2005.08.014
• May J., Höppel HW., Göken M.:
  Strain Rate Sensitivity of Ultrafine Grained FCC- and BCC-Type Metals
  In: Materials Science Forum 503-504 (2006), p. 781-786
  ISSN: 0255-5476
  DOI: 10.4028/www.scientific.net/MSF.503-504.781
• Mughrabi H., Höppel HW., Kautz M.:
  Microstructural Aspects of Cyclic Deformation and Fatigue of Ultrafine-Grained Metals
  In: Yuntian T. Zhu, Viktor Varyukhin (ed.): Nanostructured Materials by High-Pressure Severe Plastic Deformation, Dordrecht: 2006
  DOI: 10.1007/1-4020-3923-9_29

2004

• Durst Karsten, Franke Oliver, Höppel Heinz Werner, Affeldt Ernst, Göken Mathias:
  Mikrostruktur und lokale mechanische Eigenschaften von platinmodifizierten Aluminidschichten auf Nickelbasis-Superlegierungen nach thermomechanischer Ermüdung
  Metallographietagung 2004 (Bochum)
  In: Prakt. Met. Sonderband 36, Frankfurt: 2004
• Höppel Heinz Werner, Göken Mathias, Klein Martin:
  Large chamber scanning electron microscopes: Challenges and Aspects for Materials Science
  In: Imaging & Microscopy (2004), p. 34-35
  ISSN: 1439-4243
• Göken M., Höppel HW., May J.:
  Enhanced strength and ductility in ultrafine-grained aluminium produced by accumulative roll bonding (ARB)
  In: Advanced Engineering Materials 6 (2004), p. 781-784
  ISSN: 1438-1656
• Neuner Frank, Nützel Ralf, Höppel Heinz Werner:
  Fretting fatigue of low carbon steels in the high cycle fatigue regime
  In: MP Materials Testing 46 (2004), p. 379-383
  ISSN: 0025-5300
• Höppel Heinz Werner, Kautz Martin, Xu Cheng, Barta-Schreiber Nicole, Langdon Terry G., Mughrabi Hael:
  Cyclic deformation behaviour and possibilities for enhancing the fatigue properties of ultrafine-grained metals
  NANOSPD2 (Wien)
  In: Proc. of the Conf. "Nanomaterials by Severe Plastic Deformation – NANOSPD2”, Weinheim: 2004
• Höppel Heinz Werner, Kautz Martin, Mughrabi Hael:
  Fatigue lives and cyclic deformation behaviour of ultrafine-grained metals and alloys
  DVM/DFG-Abschlusskolloquium "Lebensdauervorhersage” (Berlin)
  In: DVM/DFG-Abschlusskolloquium "Lebensdauervorhersage”, Berlin: 2004
• Höppel HW., Neuner F., Nützel R.:
  Fretting fatigue of low carbon steels in the high cycle fatigue regime
  LCF 5 (Berlin)
  In: 5th Int. Conf on Low Cycle Fatigue, Berlin: 2004
• Mughrabi Hael, Höppel Heinz Werner, Kautz Martin:
  Fatigue and microstructure of ultrafine-grained metals produced by severe plastic deformation
  In: Scripta Materialia 51 (2004), p. 807-812
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2004.05.012
• Neuner F., Nützel R., Höppel HW.:
  Fretting fatigue of carbon steels in the high cycle fatigue regime
  In: Materials Testing 46 (2004), p. 379-383
  ISSN: 0025-5300
  DOI: 10.1515/mt-2004-0379

2003

• Höppel Heinz Werner, Neuner Frank:
  Untersuchung von mikrostrukturellen Einflussgrößen auf das Reibermüdungsverhalten und auf die Schädigungsmechanismen am Beispiel von Eisenbasislegierungen
  World of Dynamic Testing, (~)
  In: 10. Roell Amsler Symposium 2003 2003
• Mughrabi H., Höppel HW., Kautz M., Valiev R.:
  Annealing treatments to enhance thermal and mechanical stability of ultrafine-grained metals produced by severe plastic deformation
  In: Zeitschrift für Metallkunde 94 (2003), p. 1079-1083
  ISSN: 0044-3093
  DOI: 10.3139/146.031079

2002

• Zeschky Jürgen, Lo J.S.H., Scheffler M., Höppel Heinz Werner, Arnold Michael, Greil Peter:
  Polysiloxane-derived ceramic foam for the reinforcement of Mg alloy
  In: Zeitschrift für Metallkunde 93 (2002), p. 812-818
  ISSN: 0044-3093
• Biermann Horst, Christ Hans-Jürgen, Höppel Heinz Werner:
  Editorial in special issue of the ocassion of Prof. Mughrabi's 65th Birthday, Haël Mughrabi 65 years
  In: Zeitschrift für Metallkunde 93 (2002), p. 600-601
  ISSN: 0044-3093
• Höppel Heinz Werner, Valiev R.Z.:
  On the possibilities to enhance the fatigue properties of ultrafine-grained metals
  In: Zeitschrift für Metallkunde 93 (2002), p. 641-648
  ISSN: 0044-3093
• Höppel Heinz Werner, Eisenmeier G., Holzwarth B., Mughrabi Hael:
  Cyclic deformation and fatigue behaviour of the magnesium alloy AZ91: temperature effects and two-step fatigue tests
  In: Proc. of 8th Int. Fatigue Congress (FATIGUE 2002), West Midlands, UK: 2002
• Eisenmeier G., Höppel Heinz Werner, Ding Z.H., Mughrabi Hael:
  Ermüdungslebensdauer der Magnesiumlegierung AZ 91: Expriment und Modellierung
  2. DVM/DFG-Kolloquium Lebensdauervorhersage (Berlin)
  In: Mechanismenorientierte Lebensdauervorhersage für zyklisch beanspruchte metallische Werkstoffe 2002
• Höppel Heinz Werner, Zhou Z.M., Mughrabi Hael, Valiev R.V.:
  Microstructural study of the parameters governing coarsening and cyclic softening in fatigued ultrafine-grained copper
  In: Philosophical Magazine A (2002), p. 1781-1794
  ISSN: 0141-8610
  DOI: 10.1080/01418610210131399
• Kautz Martin, Höppel Heinz Werner, Zhou Z.M., Mughrabi Hael:
  Fatigue lives and cyclic deformation behaviour of ultrafine grained materials
  2. DVM/DFG-Kolloquium Lebensdauervorhersage (Berlin)
  In: Mechanismenorientierten Lebensdauervorhersage für zyklisch beanspruchte metallische Werkstoffe 2002
• Borbely A., Mughrabi Hael, Eisenmeier Gerd, Höppel Heinz Werner:
  A finite element modelling study of strain localization in the vicinity of near-surface cavities as a cause of subsurface fatigue crack initiation
  In: International Journal of Fracture 115 ( (2002), p. 227-232
  ISSN: 0376-9429
  DOI: 10.1023/A:1016350528652
• Ding H.-Z., Mughrabi Hael, Höppel Heinz Werner:
  A low-cycle fatigue life predication model of ultrafine-grained metals
  In: Fatigue & Fracture of Engineering Materials & Structures 25 (2002), p. 975-984
  ISSN: 8756-758X
• Eisenmeier G., Höppel Heinz Werner, Ding Z.H., Mughrabi Hael:
  Ermüdungslebensdauer der Magnesiumlegierung AZ91: Experiment und Modellierung
  In: Materialwissenschaft und Werkstofftechnik (2002), p. 238-243
  ISSN: 0933-5137

2001

• Höppel Heinz Werner, Brunnbauer M., Mughrabi Hael, Valiev R.Z., Zhilyaev A.P.:
  Cyclic deformation behaviour of ultrafine grain size copper produced by equal channel angular extrusion;
  ~ (Frankfurt)
  In: Materials Week 2000 Proceedings 2001
  URL: http://www.materialsweek.org/proceedings
• Eisenmeier G., Holzwarth B., Mughrabi Hael, Höppel Heinz Werner:
  Cyclic deformation and fatigue behaviour of the magnesium alloy AZ91
  In: Proc. of 12th Int. Conf. on Strength of Materials (ICSMA 12), Mat. Sci. Eng. A319-321: 2001