Göken, Mathias

2025

• Bezold A., Egan A., Völkl J., Karpstein N., Gaag T., Spiecker E., Göken M., Mills MJ., Neumeier S.:
  Localized phase transformation strengthening in CoNi-based superalloys
  In: Scripta Materialia 254 (2025), Article No.: 116312
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2024.116312

2024

• Bezold A., Vollhüter J., Karpstein N., Lenz M., Subramanyam AP., Zenk C., Hammerschmidt T., Spiecker E., Göken M., Neumeier S.:
  Segregation-induced strength anomalies in complex single-crystalline superalloys
  In: Communications Materials 5 (2024), Article No.: 8
  ISSN: 2662-4443
  DOI: 10.1038/s43246-024-00447-x
• Haußmann L., Bresler J., Neumeier S., Pyczak F., Göken M.:
  Interdiffusion Coefficients and Strengthening Effects of Nb, Ta, and Zr in the α2-Ti3Al Phase
  In: Journal of Phase Equilibria and Diffusion (2024)
  ISSN: 1547-7037
  DOI: 10.1007/s11669-024-01105-y
• Haußmann L., Neumeier S., Hausmann A., Bergamaschi E., Göken M.:
  Combinatorial Materials Research for the Development of New Advanced CoNi-Base Superalloys
  15th International Symposium on Superalloys, ISS 2024 (Pennsylvania, PA, USA, 8. September 2024 - 12. September 2024)
  In: Jonathan Cormier, Ian Edmonds, Stephane Forsik, Paraskevas Kontis, Corey O’Connell, Timothy Smith, Akane Suzuki, Sammy Tin, Jian Zhang (ed.): Minerals, Metals and Materials Series 2024
  DOI: 10.1007/978-3-031-63937-1_8
• Kirchmayer A., Hausmann A., Gabel S., Pröbstle M., Giese S., Göken M., Hünert D., Neumeier S.:
  The influence of crack and interface oxidation on dwell fatigue crack propagation behavior of the nickel-base superalloy ATI A718Plus
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 55 (2024), p. 803-811
  ISSN: 1073-5623
  DOI: 10.1007/s11661-023-07286-4
• Kirchmayer A., Hausmann D., Gabel S., Pröbstle M., Giese S., Göken M., Hünert D., Neumeier S.:
  The influence of crack and interface oxidation on dwell fatigue crack propagation behavior of the nickel-base superalloy ATI A718Plus
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 55 (2024), p. 803-811
  ISSN: 1073-5623
  DOI: 10.1007/s11661-023-07286-4
• Krapf A., Merle B., Gebhart DD., Reiter M., Lassnig A., Göken M., Cordill MJ., Gammer C.:
  Observing High-Cycle Fatigue Damage in Freestanding Gold Thin Films with Bulge Testing and Intermittent Transmission Electron Microscopy Imaging
  In: Advanced Engineering Materials (2024)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202400216
• Kuglstatter M., Nitschky M., Hartmann A., Kümmel F., Fecher J., Felfer P., Höppel HW., Göken M.:
  Adapting Conductivity and Mechanical Properties through Layer Thickness Variation in Copper Niobium Laminated Metallic Composites
  In: Advanced Engineering Materials (2024), Article No.: 2400266
  ISSN: 1438-1656
  DOI: 10.1002/adem.202400266
• Neumeier S., Freund L., Bezold A., Köbrich M., Vollhüter J., Hausmann D., Solis C., Stark A., Schell N., Pyczak F., Felfer P., Gilles R., Göken M.:
  Advanced Polycrystalline γ′-Strengthened CoNiCr-Based Superalloys
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2024)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-024-07319-6
• Pereira RM., Lohbauer U., Schulbert C., Göken M., Wurmshuber M., Campos TBM., Thim GP., Mieller B., Belli R.:
  Instantiations of Multiscale Kinship in Pressing‐Defect Distributions in Yttria‐Stabilized Zirconias by Powder Partitioning
  In: Advanced Engineering Materials (2024)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202400139
• Seynstahl A., Köbrich M., Rosnitschek T., Göken M., Tremmel S.:
  Enhancing the lifetime and vacuum tribological performance of PVD-MoS2 coatings by nitrogen modification
  In: Surface & Coatings Technology 477 (2024), Article No.: 130343
  ISSN: 0257-8972
  DOI: 10.1016/j.surfcoat.2023.130343
• Titz K., Vollhüter J., Randelzhofer P., Neumeier S., Göken M., Wahlmann B., Körner C.:
  Design and Characterization of a Novel NiAl–(Cr,Mo) Eutectic Alloy
  In: Advanced Engineering Materials (2024)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202302079
• Tsankova S., Nagel O., Bezold A., Grandjean B., Kirchmayer A., Göken M., Neumeier S.:
  Exploring Microstructural Characteristics, Mechanical Behavior, Hydrogen Embrittlement, and Long-Term Stability of Polycrystalline CoNiCr-Based Superalloys
  15th International Symposium on Superalloys, ISS 2024 (Pennsylvania, PA, USA, 8. September 2024 - 12. September 2024)
  In: Jonathan Cormier, Ian Edmonds, Stephane Forsik, Paraskevas Kontis, Corey O’Connell, Timothy Smith, Akane Suzuki, Sammy Tin, Jian Zhang (ed.): Minerals, Metals and Materials Series 2024
  DOI: 10.1007/978-3-031-63937-1_30

2023

• Bezold A., Amon L., Karpstein N., Spiecker E., Göken M., Neumeier S.:
  Recovery of superlattice stacking faults at high temperatures
  In: Scripta Materialia 222 (2023), Article No.: 115005
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2022.115005
• Fuchs C., Elitzer D., Höppel HW., Göken M., Zaeh MF.:
  Investigation into the influence of the interlayer temperature on machinability and microstructure of additively manufactured Ti-6Al-4V
  In: Production Engineering (2023)
  ISSN: 0944-6524
  DOI: 10.1007/s11740-023-01192-9
• Förner A., Vollhüter J., Krapf A., Jamjoom AFA., Hausmann D., Wahlmann B., Fu Z., Körner C., Neumeier S., Göken M.:
  Using Selective Electron Beam Melting to Enhance the High-Temperature Strength and Creep Resistance of NiAl–28Cr–6Mo In Situ Composites
  In: Advanced Engineering Materials (2023)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202300407
• Goik P., Schiffl A., Höppel HW., Göken M.:
  The Role of Through-Thickness Variation of Texture and Grain Size on Bending Ductility of Al–Mg–Si Profiles
  Light Metals Symposium held at the TMS Annual Meeting and Exhibition, TMS 2023 (San Diego, CA, USA, 19. March 2023 - 23. March 2023)
  In: Stephan Broek (ed.): Minerals, Metals and Materials Series 2023
  DOI: 10.1007/978-3-031-22532-1_77
• Khanchandani H., Zeiler S., Strobel L., Göken M., Felfer P.:
  A Carbon-Stabilized Austenitic Steel with Lower Hydrogen Embrittlement Susceptibility
  In: Steel Research International (2023)
  ISSN: 1611-3683
  DOI: 10.1002/srin.202300372
• Kirchmayer A., Pröbstle M., Huenert D., Neumeier S., Göken M.:
  Influence of Grain Size and Volume Fraction of η/δ Precipitates on the Dwell Fatigue Crack Propagation Rate and Creep Resistance of the Nickel-Base Superalloy ATI 718Plus
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2023)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-023-07001-3
• Kirchmayer A., Weiser M., Randelzhofer P., Freund L., Gehrmann B., Haghighat MH., Huenert D., Göken M., Neumeier S.:
  Oxidation Behavior of the Polycrystalline Ni-Base Superalloy VDM® Alloy 780
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2023)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-022-06956-z
• Kuczyk M., Zawischa M., Krülle T., Vollhüter J., Zeiler S., Leonhardt M., Kaspar J., Zimmer O., Göken M., Leyens C., Zimmermann M.:
  In situ mechanical testing of hard yet tough high entropy nitride coatings deposited on compliant steel substrates
  In: Thin Solid Films 787 (2023), Article No.: 140137
  ISSN: 0040-6090
  DOI: 10.1016/j.tsf.2023.140137
• Köbrich M., Förner A., Volz N., Zenk C., Fries SG., Göken M., Neumeier S.:
  Influence of refractory and platinum group metals on the microstructure and thermo-physical properties of Co-Al-W-based superalloys
  In: Journal of Alloys and Compounds 947 (2023), Article No.: 169542
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2023.169542
• Palm MS., Diepold B., Neumeier S., Höppel HW., Göken M., Zaeh MF.:
  Detection and effects of lack of fusion defects in Hastelloy X manufactured by laser powder bed fusion
  In: Materials & Design 230 (2023), Article No.: 111941
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2023.111941
• Pohl P., Kuglstatter M., Göken M., Höppel HW.:
  Quantifying Co-Deformation Effects in Metallic Laminates by Loading–Unloading–Reloading Tensile Tests
  In: Metals 13 (2023), p. 1049
  ISSN: 2075-4701
  DOI: 10.3390/met13061049
• Vollhüter J., Bezold A., Karpstein N., Köbrich M., Spiecker E., Göken M., Neumeier S.:
  Strain Rate-Dependent Anomalous Work Hardening of a Single-Crystalline CoNi-Base Superalloy
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2023)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-023-06966-5
• Xue F., Bezold A., Volz N., Kirchmayer A., Zenk C., Neumeier S., Göken M.:
  Influence of the γ′ Volume Fraction on the High-Temperature Strength of Single Crystalline Co–Al–W–Ta Superalloys
  In: Crystals 13 (2023), Article No.: 1095
  ISSN: 2073-4352
  DOI: 10.3390/cryst13071095

2022

• Bezold A., Freund L., Förner A., Völkl J., Huber LK., Göken M., Neumeier S.:
  Deformation Mechanisms in Compositionally Complex Polycrystalline CoNi-Base Superalloys: Influence of Temperature, Strain-Rate and Chemistry
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2022)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-022-06912-x
• Bezold A., Volz N., Lenz M., Karpstein N., Zenk C., Spiecker E., Göken M., Neumeier S.:
  Quantification of the temperature-dependent evolution of defect structures in a CoNi-base superalloy
  In: Acta Materialia 227 (2022), Article No.: 117702
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2022.117702
• Bezold A., Volz N., Xue F., Neumeier S., Göken M.:
  Anomalous Work Hardening Behavior of a Single Crystalline Co-Base Superalloy
  In: Alloys 1 (2022), p. 243-253-253
  ISSN: 2674-063X
  DOI: 10.3390/alloys1030015
• Diepold B., Schunk C., Kümmel F., Fey T., Prakash A., Höppel HW., Göken M.:
  Fatigue Life Optimized Layer Architecture of Ultrafine-Grained Al-Ti Laminates Under Bending Stresses
  In: Advanced Engineering Materials (2022)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202101143
• Elitzer D., Jäger S., Höll C., Baier D., Varga R., Zaeh MF., Göken M., Höppel HW.:
  Development of Microstructure and Mechanical Properties of TiAl6V4 Processed by Wire and Arc Additive Manufacturing
  In: Advanced Engineering Materials (2022)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202201025
• Gabel S., Giese S., Webler R., Neumeier S., Göken M.:
  Microcantilever Fracture Tests of α-Cr Containing NiAl Bond Coats
  In: Advanced Engineering Materials (2022)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202101429
• Gabel S., Merle B., Bitzek E., Göken M.:
  A new method for microscale cyclic crack growth characterization from notched microcantilevers and application to single crystalline tungsten and a metallic glass
  In: Journal of Materials Research (2022), p. 2061-2072
  ISSN: 0884-2914
  DOI: 10.1557/s43578-022-00618-x
• Göken M., Hangen UD.:
  nanomech 5
  In: International Journal of Materials Research 96 (2022), p. 1225-1225
  ISSN: 1862-5282
  DOI: 10.1515/ijmr-2005-0213
• Hausmann D., Freund L., Solis C., Giese S., Göken M., Gilles R., Neumeier S.:
  Cracking during High-Temperature Deformation of a High-Strength Polycrystalline CoNi-Base Superalloy
  In: Metals 12 (2022)
  ISSN: 2075-4701
  DOI: 10.3390/met12091520
• Haußmann L., Burbaum B., Stoehr B., Förner A., Freund L., Göken M., Neumeier S.:
  Crack-Free Welding of a Co-Base Superalloy with High γ' Precipitate Fraction
  In: Advanced Engineering Materials (2022)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202200609
• Haußmann L., Neumeier S., Bresler J., Keim S., Pyczak F., Göken M.:
  Influence of Nb, Ta and Zr on the Interdiffusion Coefficients and Solid Solution Strengthening of γ-TiAl Single Phase Alloys
  In: Metals 12 (2022), Article No.: 752
  ISSN: 2075-4701
  DOI: 10.3390/met12050752
• Höppel HW., May J., Eisenlohr P., Göken M.:
  Strain-rate sensitivity of ultrafine-grained materials
  In: International Journal of Materials Research 96 (2022), p. 566-571
  ISSN: 1862-5282
  DOI: 10.3139/ijmr-2005-0101
• Krauß S., Seynstahl A., Tremmel S., Meyer B., Bitzek E., Göken M., Yokosawa T., Zubiri BA., Spiecker E., Merle B.:
  Structural reorientation and compaction of porous MoS2 coatings during wear testing
  In: Wear 500-501 (2022), Article No.: 204339
  ISSN: 0043-1648
  DOI: 10.1016/j.wear.2022.204339
• Liang Z., Neumeier S., Rao Z., Göken M., Pyczak F.:
  CALPHAD informed design of multicomponent CoNiCr-based superalloys exhibiting large lattice misfit and high yield stress
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 854 (2022), Article No.: 143798
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2022.143798
• Liang Z., Paul JDH., Stark A., Bezold A., Neumeier S., Göken M., Pyczak F.:
  High-Temperature CoNi-Based Superalloys Strengthened by γ′-(Ni,Co)3(Cr,Al,Ti,X): The Effect of Refractory Elements
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2022)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-022-06795-y
• Lubauer J., Ast J., Göken M., Merle B., Lohbauer U., Belli R.:
  Resistance-curve envelopes for dental lithium disilicate glass-ceramics
  In: Journal of the European Ceramic Society (2022)
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2022.01.013
• Messing GL., Bose S., Göken M., Morgan SE.:
  JMR early career scholars in materials science annual issue
  In: Journal of Materials Research 37 (2022), p. 1-1
  ISSN: 0884-2914
  DOI: 10.1557/s43578-021-00475-0
• Wahlmann B., Bandorf J., Volz N., Förner A., Pröbstle J., Multerer K., Göken M., Markl M., Neumeier S., Körner C.:
  Numerical Design of CoNi-Base Superalloys With Improved Casting Structure
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2022)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-022-06870-4
• Webler R., Baranova P., Karewar S., Möller J., Neumeier S., Göken M., Bitzek E.:
  On the influence of Al-concentration on the fracture toughness of NiAl: Microcantilever fracture tests and atomistic simulations
  In: Acta Materialia 234 (2022), Article No.: 117996
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2022.117996

2021

• Bezold A., Volz N., Lenz M., Zenk C., Spiecker E., Mills MJ., Göken M., Neumeier S.:
  Yielding behavior of a single-crystalline γ'-strengthened Co-Ti-Cr superalloy
  In: Scripta Materialia 200 (2021), p. 113928
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2021.113928
• Diepold B., Neumeier S., Meermeier A., Höppel HW., Sebald T., Göken M.:
  Temperature-Dependent Dynamic Strain Aging in Selective Laser Melted 316L
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202001501
• Diepold B., Palm MS., Wimmer A., Sebald T., Höppel HW., Neumeier S., Göken M.:
  Rotating Scan Strategy Induced Anisotropic Microstructural and Mechanical Behavior of Selective Laser Melted Materials and Their Reduction by Heat Treatments
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202100622
• Feldner P., Merle B., Göken M.:
  Breakdown of the superplastic deformation behavior of heterogeneous nanomaterials at small length scales
  In: Materials Research Letters 9 (2021), p. 41-49
  ISSN: 2166-3831
  DOI: 10.1080/21663831.2020.1818323
  URL: https://www.tandfonline.com/doi/pdf/10.1080/21663831.2020.1818323
• Förner A., Vollhüter J., Hausmann D., Arnold C., Felfer P., Neumeier S., Göken M.:
  Nanostructuring of Nb-Si-Cr Alloys by Electron Beam Melting to Improve the Mechanical Properties and the Oxidation Behavior
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2021)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-021-06516-x
• Gabel S., Giese S., Merle B., Sprenger I., Heilmaier M., Neumeier S., Bitzek E., Göken M.:
  Microcantilever Fracture Tests on Eutectic NiAl–Cr(Mo) In Situ Composites
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202001464
  URL: https://onlinelibrary.wiley.com/doi/epdf/10.1002/adem.202001464
• Hausmann D., Förner A., Pröbstle M., Huenert D., Felfer P., Göken M., Neumeier S.:
  Correlation Between Local Chemical Composition and Formation of Different Types of Ordered Phases in the Polycrystalline Nickel-Base Superalloy A718Plus
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202100558
• Haußmann L., Rehman HU., Matschkal D., Göken M., Neumeier S.:
  Solid solution strengthening of Mo, Re, Ta and W in Ni during high-temperature creep
  In: Metals 11 (2021), Article No.: 1909
  ISSN: 2075-4701
  DOI: 10.3390/met11121909
• Kümmel F., Höppel HW., Göken M.:
  Ultrafine-Grained Laminated Metal Composites: A New Material Class for Tailoring Cyclically Stressed Components
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202100070
• Liang Z., Göken M., Lorenz U., Neumeier S., Oehring M., Pyczak F., Stark A., Wang L.:
  Influence of small amounts of Si and Cr on the high temperature oxidation behavior of novel cobalt base superalloys
  In: Corrosion Science 184 (2021), Article No.: 109388
  ISSN: 0010-938X
  DOI: 10.1016/j.corsci.2021.109388
• Liang Z., Pyczak F., Stark A., Rao Z., Neumeier S., Göken M.:
  Breaking the continuity of the Al2O3 oxide scale by additions of Cr in Co-Al-W-based superalloys
  In: Corrosion Science 189 (2021), Article No.: 109594
  ISSN: 0010-938X
  DOI: 10.1016/j.corsci.2021.109594
• Liebig JP., Mackovic M., Spiecker E., Göken M., Merle B.:
  Grain boundary mediated plasticity: A blessing for the ductility of metallic thin films?
  In: Acta Materialia 215 (2021), Article No.: 117079
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2021.117079
  URL: https://www.sciencedirect.com/science/article/pii/S1359645421004596/pdfft?isDTMRedir=true&download=true
• Matschkal D., Tuengerthal P., Lamm S., Göken M., Höppel HW., Felfer P.:
  Understanding the high creep resistance of mri 230d magnesium alloy through nanoindentation and atom probe tomography
  In: Metals 11 (2021), Article No.: 1727
  ISSN: 2075-4701
  DOI: 10.3390/met11111727
• Misra A., Göken M., Mara NA., Beyerlein IJ.:
  Hierarchical and heterogeneous multiphase metallic nanomaterials and laminates
  In: Mrs Bulletin (2021)
  ISSN: 0883-7694
  DOI: 10.1557/s43577-021-00059-7
• Neumeier S., Bresler J., Zenk C., Haußmann L., Stark A., Pyczak F., Göken M.:
  Partitioning Behavior of Nb, Ta, and Zr in Fully Lamellar gamma/alpha(2) Titanium Aluminides and Its Effect on the Lattice Misfit and Creep Behavior
  In: Advanced Engineering Materials (2021)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202100156
• Neumeier S., Pyczak F., Göken M.:
  The temperature dependent lattice misfit of rhenium and ruthenium containing nickel-base superalloys – Experiment and modelling
  In: Materials and Design 198 (2021), Article No.: 109362
  ISSN: 0261-3069
  DOI: 10.1016/j.matdes.2020.109362
• Pohl P., Kümmel F., Schunk C., Serrano-Munoz I., Markötter H., Göken M., Höppel HW.:
  About the role of interfaces on the fatigue crack propagation in laminated metallic composites
  In: Materials 14 (2021), Article No.: 2564
  ISSN: 1996-1944
  DOI: 10.3390/ma14102564
• Preiß E., Merle B., Xiao Y., Gannott F., Liebig JP., Wheeler JM., Göken M.:
  Applicability of focused Ion beam (FIB) milling with gallium, neon, and xenon to the fracture toughness characterization of gold thin films
  In: Journal of Materials Research (2021)
  ISSN: 0884-2914
  DOI: 10.1557/s43578-020-00045-w
  URL: https://link.springer.com/content/pdf/10.1557/s43578-020-00045-w.pdf
• Sommerschuh M., Wirth J., Englisch S., Przybilla T., Apeleo Zubiri B., Pistor J., Merle B., Körner C., Göken M., Spiecker E.:
  A scale-bridging study of the influence of TCP phases on the mechanical properties of an additive manufactured Ni-base superalloy combining microcompression testing, X-ray nanotomography and TEM
  In: Microscopy and Microanalysis 27 (2021), p. 938-942
  ISSN: 1431-9276
  DOI: 10.1017/S1431927621003603
• Volz N., Xue F., Bezold A., Zenk C., Fries SG., Schreuer J., Neumeier S., Göken M.:
  Design of a Co–Al–W–Ta Alloy Series with Varying γ′ Volume Fraction and Their Thermophysical Properties
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2021)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-021-06353-y
• Volz N., Xue F., Zenk C., Bezold A., Gabel S., Subramanyam AP., Drautz R., Hammerschmidt T., Makineni SK., Gault B., Göken M., Neumeier S.:
  Understanding creep of a single-crystalline Co-Al-W-Ta superalloy by studying the deformation mechanism, segregation tendency and stacking fault energy
  In: Acta Materialia 214 (2021), p. 117019
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2021.117019
• Volz N., Zenk C., Karpstein N., Lenz M., Spiecker E., Göken M., Neumeier S.:
  Creep properties and deformation mechanisms of single-crystalline gamma '-strengthened superalloys in dependence of the Co/Ni ratio
  In: Philosophical Magazine (2021)
  ISSN: 1478-6435
  DOI: 10.1080/14786435.2021.2017051

2020

• Bach J., Stoiber M., Schindler L., Höppel HW., Göken M.:
  Deformation mechanisms and strain rate sensitivity of bimodal and ultrafine-grained copper
  In: Acta Materialia 186 (2020), p. 363-373
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2019.12.044
• Bezold A., Volz N., Xue F., Zenk CH., Neumeier S., Göken M.:
  On the Precipitation-Strengthening Contribution of the Ta-Containing Co3(Al,W)-Phase to the Creep Properties of γ/γ′ Cobalt-Base Superalloys
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 51 (2020), p. 1567-1574
  ISSN: 1073-5623
  DOI: 10.1007/s11661-020-05626-2
• Diepold B., Vorlaufer N., Neumeier S., Gartner T., Göken M.:
  Optimization of the heat treatment of additively manufactured Ni-base superalloy IN718
  In: International Journal of Minerals, Metallurgy and Materials 27 (2020), p. 640-648
  ISSN: 1674-4799
  DOI: 10.1007/s12613-020-1991-6
• Förner A., Giese S., Arnold C., Felfer P., Körner C., Neumeier S., Göken M.:
  Nanoscaled eutectic NiAl-(Cr,Mo) composites with exceptional mechanical properties processed by electron beam melting
  In: Scientific Reports 10 (2020), Article No.: 15153
  ISSN: 2045-2322
  DOI: 10.1038/s41598-020-72093-5
• Giese S., Bezold A., Pröbstle M., Heckl A., Neumeier S., Göken M.:
  The Importance of Diffusivity and Partitioning Behavior of Solid Solution Strengthening Elements for the High Temperature Creep Strength of Ni-Base Superalloys
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2020)
  ISSN: 1073-5623
  DOI: 10.1007/s11661-020-06028-0
• Hausmann D., Solís C., Freund L., Volz N., Heinemann A., Göken M., Gilles R., Neumeier S.:
  Enhancing the high-temperature strength of a Co-base superalloy by optimizing the γ/γ' microstructure
  In: Metals 10 (2020), Article No.: 321
  ISSN: 2075-4701
  DOI: 10.3390/met10030321
• Haußmann L., Neumeier S., Kolb M., Ast J., Mohanty G., Michler J., Göken M.:
  Local Mechanical Properties at the Dendrite Scale of Ni-Based Superalloys Studied by Advanced High Temperature Indentation Creep and Micropillar Compression Tests
  14th International Symposium on Superalloys, Superalloys 2021 (Seven Springs, PA, 12. September 2021 - 16. September 2021)
  In: Sammy Tin, Mark Hardy, Justin Clews, Jonathan Cormier, Qiang Feng, John Marcin, Chris O'Brien, Akane Suzuki (ed.): Minerals, Metals and Materials Series 2020
  DOI: 10.1007/978-3-030-51834-9_26
• Höppel HW., Westermeyer M., Kümmel F., Göken M.:
  The Role of Interfaces on the Deformation Mechanisms in Bimodal Al Laminates Produced by Accumulative Roll Bonding
  In: Advanced Engineering Materials (2020)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202000145
• Kirchmayer A., Lyu H., Pröbstle M., Houlle F., Förner A., Huenert D., Göken M., Felfer P., Bitzek E., Neumeier S.:
  Combining Experiments and Atom Probe Tomography-Informed Simulations on γ′ Precipitation Strengthening in the Polycrystalline Ni-Base Superalloy A718Plus
  In: Advanced Engineering Materials (2020)
  ISSN: 1438-1656
  DOI: 10.1002/adem.202000149
• Krauß S., Schieß T., Göken M., Merle B.:
  Revealing the local fatigue behavior of bimodal copper laminates by micropillar fatigue tests
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 788 (2020), Article No.: 139502
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2020.139502
• Löffl C., Saage H., Göken M.:
  The influence of near service environmental conditions on the corrosion and LCF behaviour of a beta-stabilized γ-TiAl alloy
  In: Corrosion Science 175 (2020), Article No.: 108885
  ISSN: 0010-938X
  DOI: 10.1016/j.corsci.2020.108885
• Tinoco HA., Hutař P., Merle B., Göken M., Kruml T.:
  Fracture toughness evaluation of a cracked au thin film by applying a finite element analysis and bulge test
  18th International Conference on Fracture and Damage Mechanics, FDM 2019 (Rhodes, 16. September 2019 - 18. September 2019)
  In: Key Engineering Materials 2020
  DOI: 10.4028/www.scientific.net/KEM.827.196
• Travitzky N., Boccaccini AR., Göken M.:
  The Department of Materials Science and Engineering at the Friedrich-Alexander-University of Erlangen-Nürnberg
  In: Advanced Engineering Materials 22 (2020), Article No.: 2000921
  ISSN: 1438-1656
  DOI: 10.1002/adem.202000921
• Volz N., Zenk C., Halvaci T., Matuszewska K., Neumeier S., Göken M.:
  Castability and Recrystallization Behavior of γ′-Strengthened Co-Base Superalloys
  DOI: 10.1007/978-3-030-51834-9_88
• Wang YF., Huang CX., Fang XT., Höppel HW., Göken M., Zhu YT.:
  Hetero-deformation induced (HDI) hardening does not increase linearly with strain gradient
  In: Scripta Materialia 174 (2020), p. 19-23
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2019.08.022
• Xue F., Zenk C., Freund L., Neumeier S., Göken M.:
  Understanding raft formation and precipitate shearing during double minimum creep in a γ′-strengthened single crystalline Co-base superalloy
  In: Philosophical Magazine (2020)
  ISSN: 1478-6443
  DOI: 10.1080/14786435.2020.1836415
• Zenk C., Volz N., Bezold A., Huber LK., Eggeler Y., Spiecker E., Göken M., Neumeier S.:
  The Effect of Alloying on the Thermophysical and Mechanical Properties of Co–Ti–Cr-Based Superalloys
  DOI: 10.1007/978-3-030-51834-9_89

2019

• Ast J., Ghidelli M., Durst K., Göken M., Sebastiani M., Korsunsky AM.:
  A review of experimental approaches to fracture toughness evaluation at the micro-scale
  In: Materials and Design 173 (2019), Article No.: 107762
  ISSN: 0261-3069
  DOI: 10.1016/j.matdes.2019.107762
• Bresler J., Neumeier S., Ziener M., Pyczak F., Göken M.:
  The influence of niobium, tantalum and zirconium on the microstructure and creep strength of fully lamellar gamma/alpha(2) titanium aluminides
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 744 (2019), p. 46-53
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2018.11.152
• Bresler J., Neumeier S., Ziener M., Pyczak F., Göken M.:
  The influence of niobium, tantalum and zirconium on the microstructure and creep strength of fully lamellar γ/α2 titanium aluminides
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 744 (2019), p. 46-53
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2018.11.152
• Giese S., Kern F., Macauley C., Neumeier S., Göken M.:
  Fracture resistance of yttria stabilized zirconia manufactured from stabilizer-coated nanopowder by micro cantilever bending tests
  In: Journal of the European Ceramic Society (2019)
  ISSN: 0955-2219
  DOI: 10.1016/j.jeurceramsoc.2019.05.006
• Giese S., Neumeier S., Amberger-Matschkal D., Bergholz J., Vaßen R., Göken M.:
  Microtensile creep testing of freestanding MCrAlY bond coats
  In: Journal of Materials Research (2019)
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2019.169
• Giese S., Neumeier S., Bergholz J., Naumenko D., Quadakkers WJ., Vassen R., Göken M.:
  Influence of Different Annealing Atmospheres on the Mechanical Properties of Freestanding MCrAlY Bond Coats Investigated by Micro-Tensile Creep Tests
  In: Metals 9 (2019)
  ISSN: 2075-4701
  DOI: 10.3390/met9060692
• Guillonneau G., Wheeler JM., Wehrs J., Philippe L., Baral P., Höppel HW., Göken M., Michler J.:
  Determination of the true projected contact area by in situ indentation testing
  In: Journal of Materials Research 34 (2019), p. 2859-2868
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2019.236
• Lamm S., Matschkal D., Göken M., Felfer P.:
  Impact of Mn on the precipitate structure and creep resistance of Ca containing magnesium alloys
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 761 (2019), Article No.: 137964
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2019.05.094
• Lenz M., Eggeler Y., Müller J., Zenk C., Volz N., Wollgramm P., Eggeler G., Neumeier S., Göken M., Spiecker E.:
  Tension/Compression asymmetry of a creep deformed single crystal Co-base superalloy
  In: Acta Materialia 166 (2019), p. 597-610
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2018.12.053
• Löffl C., Saage H., Göken M.:
  In situ X-ray tomography investigation of the crack formation in an intermetallic beta-stabilized TiAl-alloy during a stepwise tensile loading
  In: International Journal of Fatigue 124 (2019), p. 138-148
  ISSN: 0142-1123
  DOI: 10.1016/j.ijfatigue.2019.02.035
• Matschkal D., Kolb M., Neumeier S., Gao S., Hartmaier A., Durst K., Göken M.:
  New flat-punch indentation creep testing approach for characterizing the local creep properties at high temperatures
  In: Materials & Design 183 (2019), Article No.: 108090
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2019.108090
• Preiß E., Lyu H., Liebig JP., Richter G., Gannott F., Gruber PA., Göken M., Bitzek E., Merle B.:
  Microstructural dependence of the fracture toughness of metallic thin films: A bulge test and atomistic simulation study on single-crystalline and polycrystalline silver films
  In: Journal of Materials Research 34 (2019), p. 3483-3494
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2019.262
  URL: https://www.cambridge.org/core/journals/journal-of-materials-research/article/microstructural-dependence-of-the-fracture-toughness-of-metallic-thin-films-a-bulge-test-and-atomistic-simulation-study-on-singlecrystalline-and-polycrystalline-silver-films/73FEF9FD56EFF314E1366003EFFE8C5B#
• Schunk C., Nitschky M., Höppel HW., Göken M.:
  Superior Mechanical Properties of Aluminum-Titanium Laminates in Terms of Local Hardness and Strength
  In: Advanced Engineering Materials 21 (2019), Article No.: ARTN 1800546
  ISSN: 1438-1656
  DOI: 10.1002/adem.201800546
• Weiser M., Galetz MC., Zschau HE., Zenk C., Neumeier S., Göken M., Virtanen S.:
  Influence of Co to Ni ratio in γ′-strengthened model alloys on oxidation resistance and the efficacy of the halogen effect at 900 °C
  In: Corrosion Science (2019)
  ISSN: 0010-938X
  DOI: 10.1016/j.corsci.2019.05.007
• Zenk C., Gibson JS., Maier-Kiener V., Neumeier S., Göken M., Korte-Kerzel S.:
  Low temperature deformation of MoSi2 and the effect of Ta, Nb and Al as alloying elements
  In: Acta Materialia 181 (2019), p. 385-398
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2019.09.008
• Zhou H., Huang C., Sha X., Xiao L., Ma X., Höppel HW., Göken M., Wu X., Ameyama K., Han X., Zhu Y.:
  In-situ observation of dislocation dynamics near heterostructured interfaces
  In: Materials Research Letters 7 (2019), p. 376-382
  ISSN: 2166-3831
  DOI: 10.1080/21663831.2019.1616330

2018

• Bachmann J., Göken M., Höppel HW.:
  Fatigue of low alloyed carbon steels in the HCF/VHCF-regimes
  In: Hans-Jürgen Christ (ed.): Fatigue of Materials at Very High Numbers of Loading Cycles, Wiesbaden: Springer Spektrum, 2018, p. 1-23
  ISBN: 9783658245306
  DOI: 10.1007/978-3-658-24531-3_1
• Carton-Cordero M., Campos M., Freund L., Kolb M., Neumeier S., Göken M., Torralba JM.:
  Microstructure and compression strength of Co-based superalloys hardened by γ′ and carbide precipitation
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 734 (2018), p. 437-444
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2018.08.007
• Feldner P., Merle B., Göken M.:
  Superplastic deformation behavior of Zn-22% Al alloy investigated by nanoindentation at elevated temperatures
  In: Materials & Design 153 (2018), p. 71-79
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2018.05.008
• Freund L., Stark A., Kirchmayer A., Schell N., Pyczak F., Göken M., Neumeier S.:
  The Effect of a Grain Boundary Pinning B2 Phase on Polycrystalline Co-Based Superalloys with Reduced Density
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 49A (2018), p. 4070-4078
  ISSN: 1073-5623
  DOI: 10.1007/s11661-018-4757-2
• Freund L., Stark A., Pyczak F., Schell N., Göken M., Neumeier S.:
  The grain boundary pinning effect of the mu phase in an advanced polycrystalline γ/γ′ Co-base superalloy
  In: Journal of Alloys and Compounds 753 (2018), p. 333-342
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2018.04.204
• Freund L., Stark A., Pyczak F., Schell N., Göken M., Neumeier S.:
  The grain boundary pinning effect of the μ phase in an advanced polycrystalline γ/γ′ Co-base superalloy
  In: Journal of Alloys and Compounds 753 (2018), p. 333-342
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2018.04.204
• Huang CX., Wang YF., Ma XL., Yin S., Höppel HW., Göken M., Wu XL., Gao HJ., Zhu YT.:
  Interface affected zone for optimal strength and ductility in heterogeneous laminate
  In: Materials Today 21 (2018), p. 713-719
  ISSN: 1369-7021
  DOI: 10.1016/j.mattod.2018.03.006
• Kimmel AC., Malkowski TF., Griffiths S., Hertweck B., Steigerwald T., Freund L., Neumeier S., Göken M., Speck JS., Schlücker E.:
  High-temperature corrosion of Inconel (R) Alloy 718, Haynes (R) 282 (R) Alloy and CoWAlloy1&2 in supercritical ammonia/ammonium chloride solutio
  In: Journal of Crystal Growth 498 (2018), p. 289-300
  ISSN: 0022-0248
  DOI: 10.1016/j.jcrysgro.2018.06.018
• Kolb M., Freund L., Fischer F., Povstugar I., Makineni SK., Gault B., Raabe D., Müller J., Spiecker E., Neumeier S., Göken M.:
  On the grain boundary strengthening effect of boron in γ/γ′ Cobalt-base superalloys
  In: Acta Materialia (2018), p. 247-254
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2017.12.020
• Kümmel F., Diepold B., Prakash A., Höppel HW., Göken M.:
  Enhanced monotonic and cyclic mechanical properties of ultrafine-grained laminated metal composites with strong and stiff interlayers
  In: International Journal of Fatigue 116 (2018), p. 379-387
  ISSN: 0142-1123
  DOI: 10.1016/j.ijfatigue.2018.06.043
• Kümmel F., Diepold B., Sauer KF., Schunk C., Prakash A., Höppel HW., Göken M.:
  High Lightweight Potential of Ultrafine-Grained Aluminum/Steel Laminated Metal Composites Produced by Accumulative Roll Bonding
  In: Advanced Engineering Materials (2018)
  ISSN: 1438-1656
  DOI: 10.1002/adem.201800286
• Liebig JP., Krauß S., Göken M., Merle B.:
  Influence of stacking fault energy and dislocation character on slip transfer at coherent twin boundaries studied by micropillar compression
  In: Acta Materialia 154 (2018), p. 261-272
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2018.05.037
• Medvedev AE., Lapovok R., Koch E., Höppel HW., Göken M.:
  Optimisation of interface formation by shear inclination: Example of aluminium-cooper hybrid produced by ECAP with back-pressure
  In: Materials & Design 146 (2018), p. 142-151
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2018.03.021
• Medvedev AE., Lapovok R., Koch E., Höppel HW., Göken M.:
  Optimisation of interface formation by shear inclination: Example of aluminium-copper hybrid produced by ECAP with back-pressure
  In: Materials & Design 146 (2018), p. 142-151
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2018.03.021
• Merle B., Kraus X., Tallawi M., Scharfe B., El Fray M., Aifantis KE., Boccaccini AR., Göken M.:
  Dynamic mechanical characterization of poly(glycerol sebacate)/poly (butylene succinate-butylene dilinoleate) blends for cardiac tissue engineering by flat punch nanoindentation
  In: Materials Letters 221 (2018), p. 115-118
  ISSN: 0167-577X
  DOI: 10.1016/j.matlet.2018.03.051
• Preiß E., Gannott F., Göken M., Merle B.:
  Scaling of the fracture toughness of freestanding metallic thin films with the yield strength
  In: Materials Research Letters 6 (2018), p. 607-612
  ISSN: 2166-3831
  DOI: 10.1080/21663831.2018.1520749
• Schunk C., Nitschky M., Höppel HW., Göken M.:
  Superior Mechanical Properties of Aluminum–Titanium Laminates in Terms of Local Hardness and Strength
  In: Advanced Engineering Materials (2018)
  ISSN: 1438-1656
  DOI: 10.1002/adem.201800546
• Volz N., Zenk C., Cherukuri R., Kalfhaus T., Weiser M., Makineni SK., Betzing C., Lenz M., Gault B., Fries SG., Schreuer J., Vassen R., Virtanen S., Raabe D., Spiecker E., Neumeier S., Göken M.:
  Thermophysical and Mechanical Properties of Advanced Single Crystalline Co-base Superalloys
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2018), p. 1-11
  ISSN: 1073-5623
  DOI: 10.1007/s11661-018-4705-1
• Xue F., Zenk C., Freund L., Hoelzel M., Neumeier S., Göken M.:
  Double minimum creep in the rafting regime of a single-crystal Co-base superalloy
  In: Scripta Materialia 142 (2018), p. 129-132
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2017.08.039

2017

• Ast J., Göken M., Durst K.:
  Size-dependent fracture toughness of tungsten
  In: Acta Materialia 138 (2017), p. 198-211
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2017.07.030
• Feldner P., Merle B., Göken M.:
  Determination of the strain-rate sensitivity of ultrafine-grained materials by spherical nanoindentation
  In: Journal of Materials Research 32 (2017), p. 1466-1473
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2017.69
• Fischer C., Seefried A., Merle B., Göken M., Drummer D.:
  Influencing Hardness and Wear During the Dynamic Tempered Microinjection Molding Process by Considering Isothermal Holding Time
  In: Polymer Engineering and Science 57 (2017), p. 121-128
  ISSN: 0032-3888
  DOI: 10.1002/pen.24394
• Freund L., Giese S., Schwimmer D., Höppel HW., Neumeier S., Göken M.:
  High temperature properties and fatigue strength of novel wrought gamma/gamma' Co-base superalloys
  In: Journal of Materials Research 32 (2017), p. 4475-4482
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2017.315
• Freund L., Messe OMDM., Barnard JS., Göken M., Neumeier S., Rae CMF.:
  Segregation assisted microtwinning during creep of a polycrystalline L1(2)-hardened Co-base superalloy
  In: Acta Materialia 123 (2017), p. 295-304
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2016.10.048
• Ghanem M., Göken M., Merle B.:
  Plane-strain bulge testing of thin films under compressive residual stresses
  In: Surface & Coatings Technology 327 (2017), p. 167-173
  ISSN: 0257-8972
  DOI: 10.1016/j.surfcoat.2017.08.004
• Gulden F., Höppel HW., Göken M., Stich A., Gramstat S.:
  Fundamental Investigations of Aluminium Matrix Composite Brake Rotors for the Use in Passenger Cars
  In: EuroBreak 2017 (EB2017-MDS-026) 2017
• Göken M., Eggeler G., Zhu Y., Lu L.:
  MECHANICAL PROPERTIES AND MICROSTRUCTURE OF ADVANCED METALLIC ALLOYS IN HONOR OF PROF. HAEL MUGHRABI - PART B - HIGH TEMPERATURE AND NANOMATERIALS Introduction
  In: Journal of Materials Research 32 (2017), p. 4463-4465
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2017.469
• Höppel HW., Goik P., Krechel C., Göken M.:
  Ex and in situ investigations on the role of persistent slip bands and grain boundaries in fatigue crack initiation
  In: Journal of Materials Research 32 (2017), p. 4276-4286
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2017.313
• Iqbal F., Pyczak F., Neumeier S., Göken M.:
  Crack nucleation and elastic / plastic deformation of TiAl alloys investigated by in-situ loaded atomic force microscopy
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 689 (2017), p. 11-16
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2017.02.017
• Kolb M., Zenk C., Kirzinger A., Povstugar I., Raabe D., Neumeier S., Göken M.:
  Influence of rhenium on γ′-strengthened cobalt-base superalloys
  In: Journal of Materials Research 32 (2017), p. 2551-2559
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2017.242
• Kümmel F., Höppel HW., Göken M.:
  Layer architecture and fatigue life of ultrafine-grained laminated metal composites consisting of different aluminum alloys
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 702 (2017), p. 406-413
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2017.06.105
• Kümmel F., Tegtmeier TS., Höppel HW., Göken M.:
  Optimized layer architecture for an extended fatigue life of ultrafine-grained AA1050/AA5005 laminated metal composites
  In: IOP Conference Series: Materials Science and Engineering 194 (2017), p. 012036
  ISSN: 1757-8981
  DOI: 10.1088/1757-899X/194/1/012036
• Mikschl F., Merle B., Baum M., Heberle J., Göken M., Schmidt M.:
  Micromechanical characterization of laser consolidated nanoparticle ITO layers
  In: Thin Solid Films 642 (2017), p. 214-218
  ISSN: 0040-6090
  DOI: 10.1016/j.tsf.2017.09.046
• Preiß E., Merle B., Göken M.:
  Understanding the Extremely Low Fracture Toughness of Freestanding Gold Thin Films by In-situ Bulge Testing in an AFM
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 691 (2017), p. 218-225
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2017.03.037
  URL: http://www.sciencedirect.com/science/article/pii/S0921509317303271
• Rehman HU., Burst K., Neumeier S., Sato A., Reed R., Göken M.:
  On the temperature dependent strengthening of nickel by transition metal solutes
  In: Acta Materialia 137 (2017), p. 54-63
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2017.05.038
• Shrestha S., Fischer R., Matt G., Feldner P., Michel T., Osvet A., Levchuk I., Merle B., Golkar S., Chen H., Tedde SF., Schmidt O., Hock R., Ruehrig M., Göken M., Heiß W., Anton G., Brabec C.:
  High-performance direct conversion X-ray detectors based on sintered hybrid lead triiodide perovskite wafers
  In: Nature Photonics 11 (2017), p. 436-+
  ISSN: 1749-4885
  DOI: 10.1038/NPHOTON.2017.94
• Vierneusel B., Benker L., Tremmel S., Göken M., Merle B.:
  Isolating the effect of residual stresses on coating wear by a mechanical stress relaxation technique
  In: Thin Solid Films 638 (2017), p. 159 - 166
  ISSN: 0040-6090
  DOI: 10.1016/j.tsf.2017.06.016
  URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5a6af86239b18
• Wang L., Zenk C., Stark A., Felfer P., Gabrisch H., Göken M., Lorenz U., Pyczak F.:
  Morphology evolution of Ti3AlC carbide precipitates in high Nb containing TiAl alloys
  In: Acta Materialia 137 (2017), p. 36-44
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2017.07.018
• Xiao Y., Wehrs J., Ma H., Al-Samman T., Korte-Kerzel S., Göken M., Michler J., Spolenak R., Wheeler JM.:
  Investigation of the deformation behavior of aluminum micropillars produced by focused ion beam machining using Ga and Xe ions
  In: Scripta Materialia 127 (2017), p. 191-194
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2016.08.028
• Zenk C., Povstugar I., Li R., Rinaldi F., Neumeier S., Raabe D., Göken M.:
  A novel type of Co-Ti-Cr-base γ/γ′ superalloys with low mass density
  In: Acta Materialia 135 (2017), p. 244-251
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2017.06.024
• Zietara M., Neumeier S., Göken M., Czyrska-Filemonowicz A.:
  Characterization of γ and γ′ Phases in 2nd and 4th Generation Single Crystal Nickel-Base Superalloys
  In: Metals and Materials International 23 (2017), p. 126-131
  ISSN: 1598-9623
  DOI: 10.1007/s12540-017-6109-y

2016

• Altieri-Weimar P., Yuan W., Annibale ES., Schoemaker S., Amberger D., Göken M., Höppel HW.:
  Reliability model of LED package regarding the fatigue behavior of gold wires
• Ast J., Merle B., Durst K., Göken M.:
  Fracture toughness evaluation of NiAl single crystals by microcantilevers-a new continuous J-integral method
  In: Journal of Materials Research 31 (2016), p. 3786-3794
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2016.393
  URL: https://opus4.kobv.de/opus4-fau/files/8989/Ast_fracture_toughness.pdf
• Bach J., Möller J., Göken M., Bitzek E., Höppel HW.:
  On the transition from plastic deformation to crack initiation in the high- and very high-cycle fatigue regimes in plain carbon steels
  In: International Journal of Fatigue (2016)
  ISSN: 0142-1123
  DOI: 10.1016/j.ijfatigue.2016.04.003
  URL: http://www.sciencedirect.com/science/article/pii/S0142112316300512
• Bestmann M., Pennacchioni G., Mostefaoui S., Göken M., de Wall H.:
  Instantaneous healing of micro-fractures during coseismic slip: Evidence from microstructure and Ti in quartz geochemistry within an exhumed pseudotachylyte-bearing fault in tonalite
  In: Lithos 254 (2016), p. 84-93
  ISSN: 0024-4937
  DOI: 10.1016/j.lithos.2016.03.011
• Cartón-Cordero M., Campos M., Freund L., Kolb M., Neumeier S., Göken M., Torralba JM.:
  Mechanical behaviour of novel sintered Co-Al-W alloys at high temperatures
  World Powder Metallurgy 2016 Congress and Exhibition, World PM 2016
  URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-85035325510∨igin=inward
• Hammerschmidt T., Koßmann J., Zenk C., Neumeier S., Göken M., Lopez-Galilea I., Mujica Roncery L., Huth S., Kostka A., Theisen W., Drautz R.:
  The role of local chemical composition for TCP phase precipitation in Ni-base and Co-base superalloys
  13th International Symposium on Superalloys, SUPERALLOYS 2016
  DOI: 10.1002/9781119075646.ch10
• Javed H., Merle B., Preiß E., Hivet R., Benedetto A., Göken M.:
  Mechanical characterization of metallic thin films by bulge and scratch testing
  In: Surface & Coatings Technology 289 (2016), p. 69-74
  ISSN: 0257-8972
  DOI: 10.1016/j.surfcoat.2016.01.051
• Kolb M., Wheeler JM., Mathur HN., Neumeier S., Korte-Kerzel S., Pyczak F., Michler J., Göken M.:
  Local mechanical properties of the (β0+ω0) composite in multiphase titanium aluminides studied with nanoindentation at room and high temperatures
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 665 (2016), p. 135-140
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2016.04.026
• Krottenthaler M., Benker L., Mughal MZ., Sebastiani M., Durst K., Göken M.:
  Effect of elastic anisotropy on strain relief and residual stress determination in cubic systems by FIB-DIC experiments
  In: Materials & Design 112 (2016), p. 505-511
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2016.09.046
• Kümmel F., Hausöl T., Höppel HW., Göken M.:
  Enhanced fatigue lives in AA1050A/AA5005 laminated metal composites produced by accumulative roll bonding
  In: Acta Materialia 120 (2016), p. 150-158
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2016.08.039
• Kümmel F., Kreuz M., Hausöl T., Höppel HW., Göken M.:
  Microstructure and Mechanical Properties of Accumulative Roll-Bonded AA1050A/AA5005 Laminated Metal Composites
  In: Metals 6 (2016)
  ISSN: 2075-4701
  DOI: 10.3390/met6030056
• Liebig JP., Göken M., Richter G., Mackovic M., Przybilla T., Spiecker E., Pierron ON., Merle B.:
  A flexible method for the preparation of thin film samples for in situ TEM characterization combining shadow-FIB milling and electron beam-assisted etching
  In: Ultramicroscopy 171 (2016), p. 82-88
  ISSN: 0304-3991
  DOI: 10.1016/j.ultramic.2016.09.004
• Ma X., Huang C., Moering J., Ruppert M., Höppel HW., Göken M., Narayan J., Zhu Y.:
  Mechanical properties of copper/bronze laminates: Role of interfaces
  In: Acta Materialia 116 (2016), p. 43-52
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2016.06.023
• Merle B., Nicholson KS., Herbert EG., Göken M.:
  An improved method for point deflection measurements on rectangular membranes
  In: Materials & Design 109 (2016), p. 485-491
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2016.07.054
• Neumeier S., Rehman HU., Neuner J., Zenk C., Michel S., Schuwalow S., Rogal J., Drautz R., Göken M.:
  Diffusion of solutes in fcc Cobalt investigated by diffusion couples and first principles kinetic Monte Carlo
  In: Acta Materialia 106 (2016), p. 304-312
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2016.01.028
• Nguyen H., Boehm W., Tsoupis I., Göken M., Höppel HW., Schmidt C., Hausöl T., Ruppert M., Merklein M.:
  Tailored heat treated accumulative roll bonded aluminum blanks: failure under bending stresses
  In: Production Engineering 10 (2016), p. 399-407
  ISSN: 0944-6524
  DOI: 10.1007/s11740-016-0685-4
• Povstugar I., Zenk C., Li R., Choi P-., Neumeier S., Dolotko O., Hoelzel M., Göken M., Raabe D.:
  Elemental partitioning, lattice misfit and creep behaviour of Cr containing γ′ strengthened Co base superalloys
  In: Materials Science and Technology 32 (2016), p. 220-225
  ISSN: 0267-0836
  DOI: 10.1179/1743284715Y.0000000112
• Pröbstle M., Neumeier S., Feldner P., Rettig R., Helmer H., Singer R., Göken M.:
  Improved creep strength of nickel-base superalloys by optimized γ/γ′ partitioning behavior of solid solution strengthening elements
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 676 (2016), p. 411-420
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2016.08.121
• Pröbstle M., Neumeier S., Hopfenmüller J., Freund L., Niendorf T., Schwarze D., Göken M.:
  Superior creep strength of a nickel-based super alloy produced by selective laser melting
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 674 (2016), p. 299-307
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2016.07.061
• Ruppert M., Schunk C., Hausmann D., Höppel HW., Göken M.:
  Global and local strain rate sensitivity of bimodal Al-laminates produced by accumulative roll bonding
  In: Acta Materialia 103 (2016), p. 643-650
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2015.11.009
• Zenk C., Bauer A., Goik P., Neumeier S., Stone HJ., Göken M.:
  Microstructure, Lattice Misfit, and High-Temperature Strength of γ′-Strengthened Co-Al-W-Ge Model Superalloys
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 47 (2016), p. 2141-2149
  ISSN: 1073-5623
  DOI: 10.1007/s11661-016-3408-8
• Zenk C., Neumeier S., Engl N., Fries SG., Dolotko O., Weiser M., Virtanen S., Göken M.:
  Intermediate Co/Ni-base model superalloys - Thermophysical properties, creep and oxidation
  In: Scripta Materialia 112 (2016), p. 83-86
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2015.09.018
• Zenk C., Neumeier S., Kolb M., Volz N., Fries SG., Dolotko O., Povstugar I., Raabe D., Göken M.:
  The role of the base element in γ′ strengthened cobalt/nickel-base superalloys
  13th International Symposium on Superalloys, SUPERALLOYS 2016
  DOI: 10.1002/9781119075646.ch103

2015

• Amberger D., Blickle T., Höppel HW., Göken M.:
  Fatigue behavior of calcium containing AZ91 magnesium alloys
  In: MP Materials Testing 57 (2015), p. 126-130
  ISSN: 0025-5300
  DOI: 10.3139/120.110694
• Bauer A., Neumeier S., Pyczak F., Göken M.:
  Influence of iridium on the properties of γ′-strengthened co-base superalloys
  In: Advanced Engineering Materials 17 (2015), p. 748-754
  ISSN: 1438-1656
  DOI: 10.1002/adem.201400266
• Bei GP., Pedimonte BJ., Pezoldt M., Ast J., Fey T., Göken M., Greil P.:
  Crack Healing in Ti2Al0.5Sn0.5C-Al2O3 Composites
  In: Journal of the American Ceramic Society 98 (2015), p. 1604-1610
  ISSN: 0002-7820
  DOI: 10.1111/jace.13496
• Freund L., Bauer A., Benker L., Neumeier S., Göken M.:
  Formation of Cuboidal Co3AlC Precipitates in Carbon-Containing Co-Al-W-Based Superalloys
  In: Advanced Engineering Materials 17 (2015), p. 1113-1118
  ISSN: 1438-1656
  DOI: 10.1002/adem.201500171
• Göken M., Glatzel U.:
  DFG Research Training Group 1229 "Stable and Metastable Multi-Phase Systems for Elevated Service Temperatures"
  In: Advanced Engineering Materials 17 (2015), p. 1096-1098
  ISSN: 1438-1656
  DOI: 10.1002/adem.201500330
• Kossmann J., Zenk C., Lopez-Galilea I., Neumeier S., Kostka A., Huth S., Theisen W., Göken M., Drautz R., Hammerschmidt T.:
  Microsegregation and precipitates of an as-cast Co-based superalloy-microstructural characterization and phase stability modelling
  In: Journal of Materials Science 50 (2015), p. 6329-6338
  ISSN: 0022-2461
  DOI: 10.1007/s10853-015-9177-8
• Li D., Kunz T., Wolf N., Liebig JP., Wittmann S., Ahmad T., Hessmann MT., Auer R., Göken M., Brabec C.:
  Silicon nitride and intrinsic amorphous silicon double antireflection coatings for thin-film solar cells on foreign substrates
  In: Thin Solid Films 583 (2015), p. 25-33
  ISSN: 0040-6090
  DOI: 10.1016/j.tsf.2015.03.051
• Lopez-Galilea I., Zenk C., Neumeier S., Huth S., Theisen W., Göken M.:
  The thermal stability of intermetallic compounds in an as-cast SX co-base superalloy
  In: Advanced Engineering Materials 17 (2015), p. 741-747
  ISSN: 1438-1656
  DOI: 10.1002/adem.201400249
• Maier V., Schunk C., Göken M., Durst K.:
  Microstructure-dependent deformation behaviour of bcc-metals - indentation size effect and strain rate sensitivity
  In: Philosophical Magazine 95 (2015), p. 1766-1779
  ISSN: 1478-6435
  DOI: 10.1080/14786435.2014.982741
• Merle B., Cassel D., Göken M.:
  Time-dependent deformation behavior of freestanding and SiNx-supported gold thin films investigated by bulge tests
  In: Journal of Materials Research 30 (2015), p. 2161-2169
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2015.184
  URL: https://opus4.kobv.de/opus4-fau/files/7997/Merle_time-dependent.pdf
• Neumeier S., Freund L., Göken M.:
  Novel wrought γ/γ′ cobalt base superalloys with high strength and improved oxidation resistance
  In: Scripta Materialia 109 (2015), p. 104-107
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2015.07.030
• Pyczak F., Bauer A., Göken M., Lorenz U., Neumeier S., Oehring M., Paul J., Schell N., Schreyer A., Stark A., Symanzik F.:
  The effect of tungsten content on the properties of L12-hardened Co-Al-W alloys
  In: Journal of Alloys and Compounds 632 (2015), p. 110-115
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2015.01.031
• Rehman HU., Durst K., Neumeier S., Parsa AB., Kostka A., Eggeler G., Göken M.:
  Nanoindentation studies of the mechanical properties of the mu phase in a creep deformed Re containing nickel-based superalloy
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 634 (2015), p. 202-208
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2015.03.045
• Ruppert M., Freund L., Wenzl T., Höppel HW., Göken M.:
  Ultrafine-grained austenitic stainless steels X4CrNi18-12 and X8CrMnNi19-6-3 produced by accumulative roll bonding
  In: Metals 5 (2015), p. 730-742
  ISSN: 2075-4701
  DOI: 10.3390/met5020730
• Ruppert M., Strebl M., Höppel HW., Göken M.:
  Mechanical properties of ultrafine-grained AlZnMg(Cu)-alloys AA7020 and AA7075 processed by accumulative roll bonding
  In: Journal of Materials Science 50 (2015), p. 4422-4429
  ISSN: 0022-2461
  DOI: 10.1007/s10853-015-9008-y
• Terberger PJ., Sebold D., Webler R., Ziener M., Neumeier S., Klein L., Virtanen S., Göken M., Vassen R.:
  Isothermal aging of a γ′-strengthened Co-Al-W alloy coated with vacuum plasma-sprayed MCrAlY bond coats
  In: Surface & Coatings Technology 276 (2015), p. 360-367
  ISSN: 0257-8972
  DOI: 10.1016/j.surfcoat.2015.06.048
• Webler R., Ziener M., Neumeier S., Terberger PJ., Vassen R., Göken M.:
  Evolution of microstructure and mechanical properties of coated Co-base superalloys during heat treatment and thermal exposure
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 628 (2015), p. 374-381
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2015.01.060

2014

• Ast J., Przybilla T., Maier V., Durst K., Göken M.:
  Microcantilever bending experiments in NiAl - Evaluation, size effects, and crack tip plasticity
  In: Journal of Materials Research 29 (2014), p. 2129-2140
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2014.240
• Bach J., Höppel HW., Prell M., Göken M.:
  Crack initiation mechanisms in AA6082 fatigued in the VHCF-regime
  In: International Journal of Fatigue 60 (2014), p. 23-27
  ISSN: 0142-1123
  DOI: 10.1016/j.ijfatigue.2013.08.018
• Bhowmik A., Neumeier S., Barnard JS., Zenk C., Göken M., Rae CMF., Stone HJ.:
  Microstructure and mechanical properties of Cr-Ta-Si Laves phase-based alloys at elevated temperatures
  In: Philosophical Magazine 94 (2014), p. 3914-3944
  ISSN: 1478-6443
  DOI: 10.1080/14786435.2014.971086
• Bösch D., Pogatscher S., Hummel M., Fragner W., Uggowitzer PJ., Göken M., Höppel HW.:
  Secondary Al-Si-Mg High-pressure Die Casting Alloys with Enhanced Ductility
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 46 (2014), p. 1035-1045
  ISSN: 1073-5623
  DOI: 10.1007/s11661-014-2700-8
• Fried M., Krechel C., Affeldt EE., Eckert B., Kimmig S., Retze U., Höppel HW., Göken M.:
  Fatigue crack initiation in nickel-based superalloys studied by microstructure-based FE modeling and scanning electron microscopy
  In: MATEC Web of Conferences 14 (2014)
  ISSN: 2261-236X
  DOI: 10.1051/matecconf/20141416001
• Marr T., Freudenberger J., Maier V., Höppel HW., Göken M., Schultz L.:
  The Strengthening Effect of Phase Boundaries in a Severely Plastically Deformed Ti-Al Composite Wire
  In: Metals 4 (2014), p. 37-54
  ISSN: 2075-4701
  DOI: 10.3390/met4010037
• Merle B., Göken M.:
  Bulge fatigue testing of freestanding and supported gold films
  In: Journal of Materials Research 29 (2014), p. 267-276
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2013.373
  URL: https://opus4.kobv.de/opus4-fau/files/6426/merle_bulge.pdf
• Neumeier S., Pröbstle M., Huenert D., Göken M.:
  Tensile and creep strength of thermally exposed allvac 718Plus
  8th International Symposium on Superalloy 718 and Derivatives 2014
  In: Proceedings of 8th International Symposium on Superalloy 718 and Derivatives 2014 2014
  URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-84923090036∨igin=inward
• Povstugar I., Choi PP., Neumeier S., Bauer A., Zenk C., Göken M., Raabe D.:
  Elemental partitioning and mechanical properties of Ti- and Ta-containing Co-Al-W-base superalloys studied by atom probe tomography and nanoindentation
  In: Acta Materialia 78 (2014), p. 78-85
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2014.06.020
• Ruppert M., Höppel HW., Göken M.:
  Influence of cross-rolling on the mechanical properties of an accumulative roll bonded aluminum alloy AA6014
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 597 (2014), p. 122-127
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2013.12.075
• Webler R., Neumeier S., Göken M.:
  Characterization of oxidation protection coatings for high temperature applications by means of nanoindentation and scanning electron microscopy methods
  In: Praktische Metallographie 51 (2014), p. 568-582
  ISSN: 0032-678X
  DOI: 10.3139/147.110310
• Zenk C., Neumeier S., Stone HJ., Göken M.:
  Mechanical properties and lattice misfit of γ/γ' strengthened Co-base superalloys in the Co-W-Al-Ti quaternary system
  In: Intermetallics 55 (2014), p. 28-39
  ISSN: 0966-9795
  DOI: 10.1016/j.intermet.2014.07.006

2013

• Amberger D., Blickle T., Höppel HW., Göken M.:
  Fatigue Behavior of Calcium Containing AZ91 Magnesium Alloys
  In: T. Beck , E. Charkaluk E. (ed.): Proceedings of the 7th International Conference on Low Cycle Fatigue 2013
  DOI: 10.3139/120.110694
• Bach J., Göken M., Bitzek E., Höppel HW.:
  Influence of specimen geometry on temperature increase during ultrasonic fatigue testing
  In: Ultrasonics 53 (2013), p. 1412-1416
  ISSN: 1874-9968
  DOI: 10.1016/j.ultras.2013.04.021
• Bach J., Höppel HW., Bitzek E., Göken M.:
  Influence of specimen geometry on temperature increase during ultrasonic fatigue testing
  In: Ultrasonics 53 (2013), p. 1412-1416
  ISSN: 0041-624X
  DOI: 10.1016/j.ultras.2013.04.021
• Bach J., Höppel HW., Bitzek E., Göken M.:
  Influence of specimen geometry on temperature increase during ultrasonic fatigue testing
  In: Ultrasonics 53 (2013), p. 1412-1416
  ISSN: 0041-624X
  DOI: 10.1016/j.ultras.2013.04.021
• Göken M., Hausöl T., Höppel HW.:
  Fatigue Life, Cyclic Deformation Behaviour and Damage Mechanisms of Ultrafine-Grained AA5754 Aluminum Alloy Produced by Accumulative Roll Bonding
  In: T. Beck , E. Charkaluk E. (ed.): Proceedings of the 7th International Conference on Low Cycle Fatigue 2013
• Hay J., Maier V., Durst K., Göken M.:
  Strain-rate sensitivity (SRS) of nickel by instrumented indentation
  2012 Annual Conference on Experimental and Applied Mechanics (Costa Mesa, CA)
  DOI: 10.1007/978-1-4614-4436-7_8
• Hay J., Maier V., Durst K., Göken M.:
  Strain rate sensitivity (SRS) of Nickel by Instrumented Indentation
  In: Conference Proceedings of the Society for Experimental Mechanics Series 6 2013
  DOI: 10.1007/978-1-4614-4436-7_8
• Hoi Pang Ng ., Przybilla T., Schmidt C., Lapovok R., Orlov D., Höppel HW., Göken M.:
  Asymmetric accumulative roll bonding of aluminium-titanium composite sheets
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 576 (2013), p. 306-315
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2013.04.027
• Hoi Pang Ng ., Przybilla T., Schmidt C., Lapovok R., Orlov D., Höppel HW., Göken M.:
  Asymmetric accumulative roll bonding of aluminium–titanium composite sheets
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 576 (2013), p. 306-315
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2013.04.027
• Kommer M., Schwub S., Göken M., Höppel HW., Freudenberger J.:
  Cyclic Deformation Behaviour and Damage Mechanisms in CuAgZr Alloys
  In: T. Beck , E. Charkaluk E. (ed.): Proceedings of the 7th International Conference on Low Cycle Fatigue 2013
• Krottenthaler M., Schmid C., Schaufler J., Durst K., Göken M.:
  A simple method for residual stress measurements in thin films by means of focused ion beam milling and digital image correlation
  In: Surface & Coatings Technology 215 (2013), p. 247-252
  ISSN: 0257-8972
  DOI: 10.1016/j.surfcoat.2012.08.095
• Kurtovic A., Niendorf T., Hausöl T., Höppel HW., Göken M., Maier HJ.:
  Surface strain evolution of ultrafine-grained aluminum alloy laminates under tension-Microscale plastic instabilities and the Portevin-Le Chatelier effect
  In: Scripta Materialia 68 (2013), p. 809-812
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2013.01.036
• Kurtovic A., Niendorf T., Hausöl T., Höppel HW., Göken M., Maier HJ.:
  Surface strain evolution of ultrafme-grained aluminum alloy laminates under tension - Microscale plastic instabilities and the Portevin-Le Chatelier effect
  In: Scripta Materialia 68 (2013), p. 809-812
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2013.01.036
• Maier V., Merle B., Göken M., Durst K.:
  An improved long-term nanoindentation creep testing approach for studying the local deformation processes in nanocrystalline metals at room and elevated temperatures
  In: Journal of Materials Research 28 (2013), p. 1177-1188
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2013.39
  URL: https://opus4.kobv.de/opus4-fau/frontdoor/deliver/index/docId/5014/file/Maier_Improved.pdf
• Niendorf T., Boehner A., Höppel HW., Göken M., Valiev RZ., Maier HJ.:
  Comparison of the monotonic and cyclic mechanical properties of ultrafine-grained low carbon steels processed by continuous and conventional equal channel angular pressing
  In: Materials & Design 47 (2013), p. 138-142
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2012.12.025
• Pyczak F., Bauer A., Göken M., Neumeier S., Lorenz U., Oehring M., Schell N., Schreyer A., Stark A., Symanzik F.:
  Plastic deformation mechanisms in a crept L12 hardened Co-base superalloy
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 571 (2013), p. 13-18
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2013.02.007
• Pyczak F., Bauer A., Göken M., Neumeier S., Lorenz U., Oehring M., Schell N., Schreyer A., Stark A., Symanzik F.:
  Plastic deformation mechanisms in a crept L12 hardened Co-base superalloy
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 571 (2013), p. 13-18
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2013.02.007
• Ruppert M., Böhm W., Nguyen H., Höppel HW., Merklein M., Göken M.:
  Influence of upscaling accumulative roll bonding on the homogeneity and mechanical properties of AA1050A
  In: Journal of Materials Science 48 (2013), p. 8377-8385
  ISSN: 0022-2461
  DOI: 10.1007/s10853-013-7648-3
• Schmid C., Maier V., Schaufler J., Butz B., Spiecker E., Meier S., Göken M., Durst K.:
  Highly resolved analysis of the chemistry and mechanical properties of an a-C:H coating system by nanoindentation and auger electron spectroscopy
  In: Thin Solid Films 528 (2013), p. 263-268
  ISSN: 0040-6090
  DOI: 10.1016/j.tsf.2012.05.092
• Wheeler JM., Maier V., Durst K., Göken M., Michler J.:
  Activation parameters for deformation of ultrafine-grained aluminium as determined by indentation strain rate jumps at elevated temperature
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 585 (2013), p. 108-113
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2013.07.033

2012

• Amberger D., Eisenlohr P., Göken M.:
  On the importance of a connected hard-phase skeleton for the creep resistance of Mg alloys
  In: Acta Materialia 60 (2012), p. 2277-2289
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2012.01.017
• Bauer A., Neumeier S., Pyczak F., Göken M.:
  Creep Strength and Microstructure of Polycrystalline γ′ - Strengthened Cobalt-Base Superalloys
  DOI: 10.1002/9781118516430.ch77
• Bauer A., Neumeier S., Pyczak F., Singer R., Göken M.:
  Creep properties of different γ'-strengthened Co-base superalloys
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 550 (2012), p. 333-341
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2012.04.083
• Bestmann M., Pennacchioni G., Nielsen S., Göken M., de Wall H.:
  Deformation and ultrafine dynamic recrystallization of quartz in pseudotachylyte-bearing brittle faults: A matter of a few seconds
  In: Journal of Structural Geology 38 (2012), p. 21-38
  ISSN: 0191-8141
  DOI: 10.1016/j.jsg.2011.10.001
• Boehner A., Niendorf T., Amberger D., Höppel HW., Göken M., Maier HJ.:
  Martensitic transformation in ultrafine-grained stainless steel AISI 304l under monotonic and cyclic loading
  In: Metals 2 (2012), p. 56-64
  ISSN: 2075-4701
  DOI: 10.3390/met2010056
• Böhner A., Höppel HW., May J., Göken M.:
  Influence of the ECAP processing parameters on the cyclic deformation behavior on ultrafine-grained cubic face centered metals
  In: Advanced Engineering Materials 14 (2012), p. 842-847
  ISSN: 1438-1656
  DOI: 10.1002/adem.201100217
• Göken Mathias, Höppel Heinz Werner, Hausöl Tina, Bach Jochen, Maier Verena, Schmidt Christian W., Amberger Dorothea:
  Grain refinement and deformation mechanisms in heterogeneous ultrafine-grained materials processed by accumulative roll bonding
  Proceedings of the 33rd Risø International Symposium on Materials Science
  In: Nanometals - status and perspective 2012
• Göken M., Höppel HW., Hausöl T., Bach J., Maier V., Schmidt C., Amberger D.:
  GRAIN REFINEMENT AND DEFORMATION MECHANISMS IN HETEROGENEOUS ULTRAFINE-GRAINED MATERIALS PROCESSED BY ACCUMULATIVE ROLL BONDING
• Göken M., Webler R., Krottenthaler M., Neumeier S., Durst K.:
  Local Fracture Toughness and Residual Stress Measurements on NiAl Bond Coats by Micro Cantilever and FIB Based Bar Milling Tests
  John Wiley and Sons, 2012
  ISBN: 9780470943205
  DOI: 10.1002/9781118516430.ch10
• Hausöl T., Höppel HW., Göken M.:
  Ultrafine-grained AA6014/AA5754 laminates produced by accumulative roll bonding (ARB)
  In: Materialwissenschaft und Werkstofftechnik 43 (2012), p. 334-339
  ISSN: 0933-5137
  DOI: 10.1002/mawe.201200950
• Hausöl T., Schmidt C., Maier V., Böhm W., Nguyen MH., Merklein M., Höppel HW., Göken M.:
  Formability of ultrafine-grained AA6016 sheets processed by accumulative roll bonding
  In: Key Engineering Materials 504-506 (2012), p. 575-580
  ISSN: 1013-9826
  DOI: 10.4028/www.scientific.net/KEM.504-506.575
• Heckl A., Cenanovic S., Göken M., Singer R.:
  Discontinuous precipitation and phase stability in Re- and Ru-containing nickel-base superalloys
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 43 (2012), p. 10-19
  ISSN: 1073-5623
  DOI: 10.1007/s11661-011-0833-6
• Iqbal F., Ast J., Göken M., Durst K.:
  In situ micro-cantilever tests to study fracture properties of NiAl single crystals
  In: Acta Materialia 60 (2012), p. 1193-1200
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2011.10.060
• Maier V., Hausöl T., Schmidt C., Böhm W., Hung Nguyen ., Merklein M., Höppel HW., Göken M.:
  Tailored heat treated accumulative roll bonded aluminum blanks: Microstructure and mechanical behavior
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 43 (2012), p. 3097-3107
  ISSN: 1073-5623
  DOI: 10.1007/s11661-012-1151-3
• Merle B., Maier V., Göken M., Durst K.:
  Experimental determination of the effective indenter shape and epsilon-factor for nanoindentation by continuously measuring the unloading stiffness
  In: Journal of Materials Research 27 (2012), p. 214-221
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2011.245
  URL: https://opus4.kobv.de/opus4-fau/files/2988/merle_experimental_4245.pdf
• Merle B., Maier V., Göken M., Durst K.:
  Experimental determination of the effective indenter shape and ε-factor for nanoindentation by continuously measuring the unloading stiffness
  In: Journal of Materials Research 27 (2012), p. 214-221
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2011.245
  URL: https://opus4.kobv.de/opus4-fau/files/2988/merle_experimental_4245.pdf
• Merle B., Schweitzer E., Göken M.:
  Thickness and grain size dependence of the strength of copper thin films as investigated with bulge tests and nanoindentations
  In: Philosophical Magazine 92 (2012), p. 3172-3187
  ISSN: 0031-8086
  DOI: 10.1080/14786435.2012.685773
• Meszaros R., Merle B., Wild M., Durst K., Göken M., Wondraczek L.:
  Effect of thermal annealing on the mechanical properties of low-emissivity physical vapor deposited multilayer-coatings for architectural applications
  In: Thin Solid Films 520 (2012), p. 7130-7135
  ISSN: 0040-6090
  DOI: 10.1016/j.tsf.2012.07.086
• Neumeier S., Webler R., Krottenthaler M., Durst K., Göken M.:
  Local fracture toughness and residual stress measurements on NiAl bond coats by micro cantilever and fib-based bar milling tests
  12th International Symposium on Superalloys, Superalloys 2012 (Seven Springs, PA)
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84885926632∨igin=inward
• Schaufler J., Durst K., Haas T., Nolte R., Höppel HW., Göken M.:
  The influence of hydrogenated amorphous carbon coatings (a-C:H) on the fatigue life of coated steel specimens
  In: International Journal of Fatigue 37 (2012), p. 1-7
  ISSN: 0142-1123
  DOI: 10.1016/j.ijfatigue.2011.09.008
• Schaufler J., Schmid C., Durst K., Göken M.:
  Determination of the interfacial strength and fracture toughness of a-C:H coatings by in-situ microcantilever bending
  In: Thin Solid Films 522 (2012), p. 480-484
  ISSN: 0040-6090
  DOI: 10.1016/j.tsf.2012.08.031
• Schloffer M., Iqbal F., Gabrisch H., Schwaighofer E., Schimansky FP., Mayer S., Stark A., Lippmann T., Göken M., Pyczak F., Clemens H.:
  Microstructure development and hardness of a powder metallurgical multi phase γ-TiAl based alloy
  In: Intermetallics 22 (2012), p. 231-240
  ISSN: 0966-9795
  DOI: 10.1016/j.intermet.2011.11.015
• Schloffer M., Iqbal F., Gabrisch H., Schwaighofer E., Schimansky FP., Mayer S., Stark A., Lippmann T., Göken M., Pyczak F., Clemens H.:
  Microstructure development and hardness of a powder metallurgical multi phase γ-TiAl based alloy
  In: Intermetallics 22 (2012), p. 231-240
  ISSN: 0966-9795
  DOI: 10.1016/j.intermet.2011.11.015
• Schmidt C., Ruppert M., Höppel HW., Nachtrab F., Dietrich A., Hanke R., Göken M.:
  Design of graded materials by particle reinforcement during accumulative roll bonding
  In: Advanced Engineering Materials 14 (2012), p. 1009-1017
  ISSN: 1438-1656
  DOI: 10.1002/adem.201200046

2011

• Bestmann M., Pennacchioni G., Frank G., Göken M., de Wall H.:
  Pseudotachylyte in muscovite-bearing quartzite: Coseismic friction-induced melting and plastic deformation of quartz
  In: Journal of Structural Geology 33 (2011), p. 169-186
  ISSN: 0191-8141
  DOI: 10.1016/j.jsg.2010.10.009
• Boehner A., Maier V., Durst K., Höppel HW., Göken M.:
  Macro- and nanomechanical properties and strain rate sensitivity of accumulative roll bonded and equal channel angular pressed ultrafine-grained materials
  In: Advanced Engineering Materials 13 (2011), p. 251-255
  ISSN: 1438-1656
  DOI: 10.1002/adem.201000270
• Franke O., Göken M., Meyers MA., Durst K., Hodge AM.:
  Dynamic nanoindentation of articular porcine cartilage
  In: Materials Science and Engineering C 31 (2011), p. 789-795
  ISSN: 0928-4931
  DOI: 10.1016/j.msec.2010.12.005
• Göken M., Hemker KJ., Eberl C., Ma K., Schoenung JM., Funk M.:
  High-temperature mechanical behavior of end-of-life cryomilled NiCrAlY bond coat materials
  42 (2011), p. 2233-2241
  ISSN: 1073-5623
  DOI: 10.1007/s11661-011-0659-2
• Göken M., Höppel HW.:
  Fatigue behaviour in nanostructured metals
  Elsevier Ltd., 2011
  ISBN: 9781845696702
  DOI: 10.1533/9780857091123.3.507
• Göken M., Höppel HW.:
  Tailoring nanostructured, graded, and particle-reinforced Al laminates by accumulative roll bonding
  In: Advanced Materials 23 (2011), p. 2663-2668
  ISSN: 0935-9648
  DOI: 10.1002/adma.201100407
• Hausöl T., Höppel HW., Göken M.:
  Microstructure and mechanical properties of accumulative roll bonded AA6014/AA5754 aluminium laminates
  In: Materials Science Forum 667-669 (2011), p. 217-222
  ISSN: 0255-5476
  DOI: 10.4028/www.scientific.net/MSF.667-669.217
• Heckl A., Neumeier S., Cenanovic S., Göken M., Singer R.:
  Reasons for the enhanced phase stability of Ru-containing nickel-based superalloys
  In: Acta Materialia 59 (2011), p. 6563-6573
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2011.07.002
• Heckl A., Neumeier S., Göken M., Singer R.:
  The effect of Re and Ru on γ/γ′ microstructure, γ-solid solution strengthening and creep strength in nickel-base superalloys
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 528 (2011), p. 3435-3444
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2011.01.023
• Höppel HW., Göken M., May L., Prell M.:
  Influence of grain size and precipitation state on the fatigue lives and deformation mechanisms of CP aluminium and AA6082 in the VHCF-regime
  33 (2011), p. 10-18
  ISSN: 0142-1123
  DOI: 10.1016/j.ijfatigue.2010.04.013
• Höppel HW., Kriebel F., Lapovok R., Boehner A., Göken M.:
  Influence of backpressure during ECAP on the monotonic and cyclic deformation behavior of AA5754 and Cu99.5
  13 (2011), p. 269-274
  ISSN: 1438-1656
  DOI: 10.1002/adem.201000269
• Jennett NM., Göken M., Durst K.:
  Nano-mechanical testing in materials research and development
  In: Philosophical Magazine 91 (2011), p. 1035-1036
  ISSN: 0031-8086
  DOI: 10.1080/14786435.2011.561524
• Klein L., Bauer A., Neumeier S., Göken M., Virtanen S.:
  High temperature oxidation of γ/γ′-strengthened Co-base superalloys
  In: Corrosion Science 53 (2011), p. 2027-2034
  ISSN: 0010-938X
  DOI: 10.1016/j.corsci.2011.02.033
• Klein L., Bauer A., Neumeier S., Göken M., Virtanen S.:
  High temperature oxidation of γ/γ′-strengthened Co-base superalloys
  In: Corrosion Science 53 (2011), p. 2027-2034
  ISSN: 0010-938X
  DOI: 10.1016/j.corsci.2011.02.033
• Lodes M., Hartmaier A., Göken M., Durst K.:
  Influence of dislocation density on the pop-in behavior and indentation size effect in CaF2 single crystals: Experiments and molecular dynamics simulations
  In: Acta Materialia 59 (2011), p. 4264-4273
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2011.03.050
• Maier V., Durst K., Müller J., Backes B., Höppel HW., Göken M.:
  Nanoindentation strain-rate jump tests for determining the local strain-rate sensitivity in nanocrystalline Ni and ultrafine-grained Al
  In: Journal of Materials Research 26 (2011), p. 1421-1430
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2011.156
• Merle B., Göken M.:
  Fracture toughness of silicon nitride thin films of different thicknesses as measured by bulge tests
  In: Acta Materialia 59 (2011), p. 1772-1779
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2010.11.043
• Ndlovu S., Durst K., Göken M.:
  Deformation of WC-Co Hardmetals During Scratch Testing
  Wiley-VCH, 2011
  ISBN: 9783527323661
  DOI: 10.1002/9783527628513.ch20
• Neumeier S., Dinkel M., Pyczak F., Göken M.:
  Nanoindentation and XRD investigations of single crystalline Ni-Ge brazed nickel-base superalloys PWA 1483 and René N5
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 528 (2011), p. 815-822
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2010.09.065
• Neumeier S., Pyczaky F., Göken M.:
  Influence of rhenium and ruthenium on the local mechanical properties of the c and c0 phases in nickel-base superalloys
  In: Philosophical Magazine 91 (2011), p. 4187-4199
  ISSN: 0031-8086
  DOI: 10.1080/14786435.2011.607139
• Pfeiffer C., Affeldt E., Göken M.:
  Miniaturized bend tests on partially stabilized EB-PVD ZrO2 thermal barrier coatings
  In: Surface & Coatings Technology 205 (2011), p. 3245-3250
  ISSN: 0257-8972
  DOI: 10.1016/j.surfcoat.2010.11.047
• Pfeiffer C., Affeldt E., Göken M.:
  Miniaturized bend tests on partially stabilized EB-PVD ZrO2 thermal barrier coatings
  In: Surface & Coatings Technology 205 (2011), p. 3245-3250
  ISSN: 0257-8972
  DOI: 10.1016/j.surfcoat.2010.11.047
• Rausch MH., Durst K., Göken M., Jakobs PJ., Leipertz A., Fröba AP.:
  Studies on the origin of dropwise condensation of steam on ion implanted metallic surfaces [Untersuchungen zur Ursache der Tropfenkondensation von Wasserdampf an ionenimplantierten Metalloberflächen]
  In: Chemie Ingenieur Technik 83 (2011), p. 545-551
  ISSN: 0009-286X
  DOI: 10.1002/cite.201000182
• Ahmed F., Bayerlein K., Rosiwal S., Göken M., Durst K.:
  Stress evolution and cracking of crystalline diamond thin films on ductile titanium substrate: Analysis by micro-Raman spectroscopy and analytical modelling
  In: Acta Materialia 59 (2011), p. 5422-5433
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2011.05.015
• Schmidt C.W., Knödler P., Höppel H.W., Göken M.:
  Particle based alloying by accumulative roll bonding in the system Al-Cu
  In: Metals 1 (2011), p. 65-78
  ISSN: 2075-4701
  DOI: 10.3390/met1010065
• Schmidt C., Höppel HW., Göken M.:
  Maßgeschneiderte partikelverstärkte Verbundwerkstoffe und Werkstoffverbunde hergestellt durch den akkumulativen Walzprozess (ARB)
  18. Symposium Verbundwerkstoffe
  In: Tagungsband zum 18. Symposium Verbundwerkstoffe 2011
• Schmidt C., Knieke C., Maier V., Höppel HW., Peukert W., Göken M.:
  Accelerated grain refinement during accumulative roll bonding by nanoparticle reinforcement
  In: Scripta Materialia 64 (2011), p. 245--248
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2010.10.013
• Schmidt C., Knieke C., Maier V., Höppel HW., Peukert W., Göken M.:
  Influence of Nanoparticle Reinforcement on the Mechanical Properties of Ultrafine-Grained Aluminium Produced by ARB
  In: Materials Science Forum 667-669 (2011), p. 725--730
  ISSN: 0255-5476
  DOI: 10.4028/www.scientific.net/MSF.667-669.725
• Schwarz W., Schwub S., Quering K., Wiedmann D., Höppel HW., Göken M.:
  Life prediction of thermally highly loaded components: Modelling the damage process of a rocket combustion chamber hot wall
  In: CEAS Space Journal 1 (2011), p. 83-97
  ISSN: 1868-2502
  DOI: 10.1007/s12567-011-0007-9
• Schaufler J, Yang G, Durst K, Spiecker E, Goken M:
  Microscopic study on the interfacial strength of hydrogenated amorphous carbon coating systems
  In: Surface & Coatings Technology 205 (2011), p. 3429-3433
  ISSN: 0257-8972
  DOI: 10.1016/j.surfcoat.2010.12.005

2010

• Amberger D., Eisenlohr P., Göken M.:
  Influence of microstructure on creep strength of MRI 230D Mg alloy
  In: Journal of Physics : Conference Series 240 (2010)
  ISSN: 1742-6588
  DOI: 10.1088/1742-6596/240/1/012068
• Bauer A., Neumeier S., Pyczak F., Göken M.:
  Microstructure and creep strength of different γ/γ′-strengthened Co-base superalloy variants
  In: Scripta Materialia 63 (2010), p. 1197-1200
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2010.08.036
• Brandt B., Durst K., Belli R., Göken M., Lohbauer U.:
  Fracture toughness of GIC—A mechanistic approach on the nanoscale
  In: Dental Materials 26 (2010), p. e32
  ISSN: 0109-5641
  DOI: 10.1016/j.dental.2010.08.076
• Brandt B., Lohbauer U., Göken M., Durst K.:
  The influence of particle size on the mechanical properties of dental glass ionomer cements
  In: Advanced Engineering Materials 12 (2010), p. B684-B689
  ISSN: 1438-1656
  DOI: 10.1002/adem.201080067
• Brandt B., Zollfrank C., Franke O., Fromm J., Göken M., Durst K.:
  Micromechanics and ultrastructure of pyrolysed softwood cell walls
  In: Acta Biomaterialia 6 (2010), p. 4345-4351
  ISSN: 1742-7061
  DOI: 10.1016/j.actbio.2010.05.026
• Brunner J., May J., Höppel HW., Göken M., Virtanen S.:
  Localized corrosion of ultrafine-grained Al-Mg model alloys
  In: Electrochimica Acta 55 (2010), p. 1966-1970
  ISSN: 0013-4686
  DOI: 10.1016/j.electacta.2009.11.016
• Durst K., Hofmann S., Backes B., Mueller J., Göken M.:
  Microimprinting of nanocrystalline metals - Influence of microstructure and work hardening
  In: Journal of Materials Processing Technology 210 (2010), p. 1787-1793
  ISSN: 0924-0136
  DOI: 10.1016/j.jmatprotec.2010.06.010
• Göken M., Bauer A., Pyczak F., Neumeier S.:
  Microstructure and creep strength of different γ/γ′- strengthened Co-base superalloy variants
  63 (2010), p. 1197-1200
  ISSN: 1359-6462
  DOI: 10.1016/j.scriptamat.2010.08.036
• Hausöl T., Höppel HW., Göken M.:
  Microstructure and mechanical properties of accumulative roll bonded aluminium alloy AA5754
  In: Journal of Physics: Conference Series 240 (2010), Article No.: 012128
  ISSN: 1742-6588
  DOI: 10.1088/1742-6596/240/1/012128
• Hausöl T., Höppel HW., Göken M.:
  Tailoring materials properties of UFG aluminium alloys by accumulative roll bonded sandwich-like sheets
  In: Journal of Materials Science 45 (2010), p. 4733-4738
  ISSN: 0022-2461
  DOI: 10.1007/s10853-010-4678-y
• Hausöl T., Maier V., Schmidt C., Winkler M., Höppel HW., Göken M.:
  Tailoring materials properties by accumulative roll bonding
  In: Advanced Engineering Materials 12 (2010), p. 740-746
  ISSN: 1438-1656
  DOI: 10.1002/adem.201000044
• Heckl A., Rettig R., Cenanovic S., Göken M., Singer R.:
  Investigation of the final stages of solidification and eutectic phase formation in Re and Ru containing nickel-base superalloys
  In: Journal of Crystal Growth 312 (2010), p. 2137-2144
  ISSN: 0022-0248
  DOI: 10.1016/j.jcrysgro.2010.03.041
• Höppel HW., Prell M., May L., Göken M.:
  Influence of grain size and precipitates on the fatigue lives and deformation mechanisms in the VHCF-regime
  In: Procedia Engineering 2 (2010), p. 1025-1034
  ISSN: 1877-7058
  DOI: 10.1016/j.proeng.2010.03.111
• Maier V., Höppel HW., Göken M.:
  Nanomechanical behaviour of Al-Ti layered composites produced by accumulative roll bonding
  In: Journal of Physics: Conference Series 240 (2010), Article No.: 012108
  ISSN: 1742-6588
  DOI: 10.1088/1742-6596/240/1/012108
• Nikulina E., Durst K., Göken M., Voelkl R., Glatzel U.:
  Microstructural and micromechanical characterisation of a Pt-Al-Cr-Ni-Re alloy by means of transmission electron microscopy and nanoindentation
  In: International Journal of Materials Research 101 (2010), p. 585-588
  ISSN: 1862-5282
  DOI: 10.3139/146.110316
• Pyczak F., Neumeier S., Göken M.:
  Temperature dependence of element partitioning in rhenium and ruthenium bearing nickel-base superalloys
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 527 (2010), p. 7939-7943
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2010.08.091
• Vevecka-Priftaj A., Höppel HW., Göken M.:
  Deformation behaviour of nanocrystalline al alloy, processed by severe plastic deformation
  7th International Conference of the Balkan Physical Union (Alexandroupolis)
  DOI: 10.1063/1.3322399
• Zhu YT., Mathaudhu SN., Göken M., Langdon TG., Lowe TC., Semiatin SL., Tsuji N., Zhao YH.:
  Preface to the special issue on ultrafine grained materials
  In: Journal of Materials Science 45 (2010), p. 4543-4544
  ISSN: 0022-2461
  DOI: 10.1007/s10853-010-4709-8

2009

• Ahmed F., Durst K., Rosiwal S., Fandrey J., Schaufler J., Göken M.:
  In-situ tensile testing of crystalline diamond coatings using Raman spectroscopy
  In: Surface & Coatings Technology 204 (2009), p. 1022-1025
  ISSN: 0257-8972
  DOI: 10.1016/j.surfcoat.2009.04.030
• Amberger D., Eisenlohr P., Göken M.:
  Microstructural evolution during creep of Ca-containing AZ91
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 510-511 (2009), p. 398-402
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2008.04.115
• Armstrong P., Knieke C., Mackovic M., Frank G., Hartmaier A., Göken M., Peukert W., Mackovic M.:
  Microstructural evolution during deformation of tin dioxide nanoparticles in a comminution process
  In: Acta Materialia 57 (2009), p. 3060-3071
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2009.02.049
• Backes B., Durst K., Amberger D., Göken M.:
  Particle hardening in creep-resistant Mg-Alloy MRI 230D probed by nanoindenting atomic force microscopy
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 40 (2009), p. 257-261
  ISSN: 1073-5623
  DOI: 10.1007/s11661-008-9720-1
• Backes B., Huang YY., Göken M., Durst K.:
  The correlation between the internal material length scale and the microstructure in nanoindentation experiments and simulations using the conventional mechanism-based strain gradient plasticity theory
  In: Journal of Materials Research 24 (2009), p. 1197-1207
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2009.0123
• Das J., Pauly S., Bostroem M., Durst K., Göken M., Eckert J.:
  Designing bulk metallic glass and glass matrix composites in martensitic alloys
  In: Journal of Alloys and Compounds 483 (2009), p. 97-101
  ISSN: 0925-8388
  DOI: 10.1016/j.jallcom.2008.08.139
• Franke O., Durst K., Göken M.:
  Nanoindentation investigations to study solid solution hardening in Ni-based diffusion couples
  In: Journal of Materials Research 24 (2009), p. 1127-1134
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2009.0135
• Gebhard S., Pyczak F., Göken M.:
  Microstructural and micromechanical characterisation of TiAl alloys using atomic force microscopy and nanoindentation
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 523 (2009), p. 235-241
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2009.05.068
• Pyczak F., Neumeier S., Göken M.:
  Influence of lattice misfit on the internal stress and strain states before and after creep investigated in nickel-base superalloys containing rhenium and ruthenium
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 510-511 (2009), p. 295-300
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2008.08.052
• Rettig R., Heckl A., Neumeier S., Pyczak F., Göken M., Singer R.:
  Verification of a commercial CALPHAD database for Re and Ru containing nickel-base superalloys
  In: Defect and Diffusion Forum 289-292 (2009), p. 101-108
  ISSN: 1012-0386
  DOI: 10.4028/www.scientific.net/DDF.289-292.101
• Sadrabadi P., Durst K., Göken M.:
  Study on the indentation size effect in CaF2: Dislocation structure and hardness
  In: Acta Materialia 57 (2009), p. 1281-1289
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2008.11.015
• Sadrabadi P., Durst K., Göken M.:
  Study on the indentation size effect in CaF2: Dislocation structure and hardness
  In: Acta Materialia 57 (2009), p. 1281-1289
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2008.11.015
• Sadrabadi P., Durst K., Göken M., Blum W.:
  Quantification of dislocation structures at high resolution by atomic force microscopy of dislocation etch pits
  In: Philosophical Magazine Letters 89 (2009), p. 391-398
  ISSN: 0950-0839
  DOI: 10.1080/09500830902984554
• Saitova LR., Höppel HW., Göken M., Semenova IP., Raab GI., Valiev RZ.:
  Fatigue behavior of ultrafine-grained Ti-6Al-4V 'ELI' alloy for medical applications
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 503 (2009), p. 145-147
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2008.04.082
• Saitova LR., Höppel HW., Göken M., Semenova IP., Raab GI., Valiev RZ.:
  Fatigue behavior of ultrafine-grained Ti-6Al-4V 'ELI' alloy for medical applications
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 503 (2009), p. 145-147
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2008.04.082
• Saitova LR., Höppel HW., Göken M., Semenova IP., Valiev RZ.:
  Cyclic deformation behavior and fatigue lives of ultrafine-grained Ti-6AL-4V ELI alloy for medical use
  In: International Journal of Fatigue 31 (2009), p. 322-331
  ISSN: 0142-1123
  DOI: 10.1016/j.ijfatigue.2008.08.007
• Saitova LR., Höppel HW., Göken M., Semenova IP., Valiev RZ.:
  Cyclic deformation behavior and fatigue lives of ultrafine-grained Ti-6AL-4V ELI alloy for medical use
  In: International Journal of Fatigue 31 (2009), p. 322-331
  ISSN: 0142-1123
  DOI: 10.1016/j.ijfatigue.2008.08.007
• Saitova LR., Höppel HW., Göken M., Semenova IP., Valiev RZ.:
  Cyclic deformation behavior and fatigue lives of ultrafine-grained Ti-6AL-4V ELI alloy for medical use
  In: International Journal of Fatigue 31 (2009), p. 322-331
  ISSN: 0142-1123
  DOI: 10.1016/j.ijfatigue.2008.08.007
• Schaufler J., Durst K., Massler O., Göken M.:
  In-situ investigation on the deformation and damage behaviour of diamond-like carbon coated thin films under uniaxial loading
  In: Thin Solid Films 517 (2009), p. 1681-1685
  ISSN: 0040-6090
  DOI: 10.1016/j.tsf.2008.09.104
• Topic I., Höppel HW., Göken M.:
  Friction stir welding of accumulative roll-bonded commercial-purity aluminium AA1050 and aluminium alloy AA6016
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 503 (2009), p. 163-166
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2007.12.057

2008

• Dinkel M., Heinz P., Pyczak F., Volek A., Ott M., Affeldt E., Vossberg A., Göken M., Singer R.:
  New boron and silicon free single crystal-diffusion brazing alloys
  11th International Symposium on Superalloys, SUPERALLOYS 2008 (Seven Springs, 14. September 2008 - 18. September 2008)
  In: R.C. Reed, K.A. Kenneth, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron, S.A. Woodard (ed.): Superalloys 2008: Proceedings of the 11th Intenational Symposium of Superalloys, Warrendale: 2008
  DOI: 10.7449/2008/Superalloys_2008_211_220
• Dinkel M., Pyczak F., May J., Höppel HW., Göken M.:
  XRD profile analysis characterization of ultrafine grained Al-Mg alloys
  In: Journal of Materials Science 43 (2008), p. 7481-7487
  ISSN: 0022-2461
  DOI: 10.1007/s10853-008-2859-8
• Durst K., Göken M., Pharr GM.:
  Indentation size effect in spherical and pyramidal indentations
  In: Journal of Physics D-Applied Physics 41 (2008)
  ISSN: 0022-3727
  DOI: 10.1088/0022-3727/41/7/074005
• Franke O., Göken M., Hodge AM.:
  The nanoindentation of soft tissue: Current and developing approaches
  In: JOM Journal of the Minerals, Metals and Materials Society 60 (2008), p. 49-53
  ISSN: 1047-4838
  DOI: 10.1007/s11837-008-0071-6
• Gelse K., Muehle C., Franke O., Park J., Jehle M., Durst K., Göken M., Hennig F., Mark K., Schneider H.:
  Cell-based resurfacing of large cartilage defects: Long-term evaluation of grafts from autologous transgene-activated periosteal cells in a porcine model of osteoarthritis
  In: Arthritis & Rheumatism-Arthritis Care & Research 58 (2008), p. 475-488
  ISSN: 0893-7524
  DOI: 10.1002/art.23124
• Heinz P., Volek A., Singer R., Dinkel M., Pyczak F., Göken M., Ott M., Affeldt E., Vossberg A.:
  Diffusion brazing of single crystalline nickel base superalloys using boron free nickel base braze alloys
  In: Defect and Diffusion Forum 273-276 (2008), p. 294-299
  ISSN: 1012-0386
• Hueller M., Vlcek J., Dinkel M., Höppel HW., Göken M.:
  Hardening and thermal stability of nanocrystalline AlMg4.8 powder
  In: Philosophical Magazine 88 (2008), p. 1209-1226
  ISSN: 0031-8086
  DOI: 10.1080/14786430802089854
• Höppel HW., May J., Göken M.:
  Cyclic deformation behaviour and fatigue lives of ultrafine-grained aluminium-magnesium alloys
  4th International Conference on Nanomaterials by Severe Plastic Deformation (, 18. August 2008 - 22. August 2008)
  In: Materials Science Forum 2008
  DOI: 10.4028/www.scientific.net/msf.584-586.840
• May J., Amberger D., Dinkel M., Höppel HW., Göken M.:
  Monotonic and cyclic deformation behaviour of ultrafine-grained aluminium
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 483-484 (2008), p. 481-484
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2006.12.177
• Neumeier S., Pyczak F., Göken M.:
  The influence of ruthenium and rhenium on the local properties of the γ- and γ′-phase in nickel-base superalloys and their consequences for alloy behavior
  11th International Symposium on Superalloys, Superalloys 2008 (Champion, PA)
  In: Proceedings of the International Symposium on Superalloys 2008
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=60349117530∨igin=inward
• Nützel R., Affeldt E., Göken M.:
  Damage evolution during thermo-mechanical fatigue of a coated monocrystalline nickel-base superalloy
  In: International Journal of Fatigue 30 (2008), p. 313-317
  ISSN: 0142-1123
  DOI: 10.1016/j.ijfatigue.2007.01.045
• Saitova L., Semenova I., Höppel HW., Valiev R., Göken M.:
  Enhanced superplastic deformation behavior of ultrafine-grained Ti-6Al-4V alloy
  In: Materialwissenschaft und Werkstofftechnik 39 (2008), p. 367-370
  ISSN: 0933-5137
  DOI: 10.1002/mawe.200800308
• Saitova LR., Höppel HW., Göken M., Kilmametov AR., Semenova IP., Valiev RZ.:
  Cycling of ultrafine-grained Ti-6Al-4V ELI alloy: Microstructural changes and enhanced fatigue limit
  4th International Conference on Nanomaterials by Severe Plastic Deformation (Goslar, 18. August 2008 - 22. August 2008)
  DOI: 10.4028/www.scientific.net/msf.584-586.827
• Topic I., Höppel HW., Göken M.:
  Deformation behaviour of accumulative roll bonded and friction stir welded aluminium alloys
  4th International Conference on Nanomaterials by Severe Plastic Deformation (DEU, 18. August 2008 - 22. August 2008)
  In: Materials Science Forum 2008
  DOI: 10.4028/www.scientific.net/msf.584-586.833
• Topic I., Höppel HW., Göken M.:
  Influence of rolling direction on strength and ductility of aluminium and aluminium alloys produced by accumulative roll bonding
  In: Journal of Materials Science 43 (2008), p. 7320-7325
  ISSN: 0022-2461
  DOI: 10.1007/s10853-008-2754-3
• Topic I., Höppel HW., Staud D., Merklein M., Geiger M., Göken M.:
  Formability of accumulative roll bonded aluminum AA1050 and AA6016 investigated using bulge tests
  In: Advanced Engineering Materials 10 (2008), p. 1101-1109
  ISSN: 1438-1656
  DOI: 10.1002/adem.200800167
• Vevecka-Priftaj A., Böhner A., May J., Höppel HW., Göken M.:
  Strain rate sensitivity of ultrafine grained aluminium alloy AA6061
  4th International Conference on Nanomaterials by Severe Plastic Deformation (Goslar, 18. August 2008 - 22. August 2008)
  DOI: 10.4028/www.scientific.net/msf.584-586.741

2007

• Durst K., Franke O., Böhner A., Göken M.:
  Indentation size effect in Ni-Fe solid solutions
  In: Acta Materialia 55 (2007), p. 6825-6833
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2007.08.044
• Dzivenko DA., Zerr A., Schweitzer E., Göken M., Boehler R., Riedel R.:
  Elastic moduli and hardness of c- Zr2.86 (N0.88 O0.12) 4 having Th3 P4 -type structure
  In: Applied Physics Letters 90 (2007), Article No.: 191910
  ISSN: 0003-6951
  DOI: 10.1063/1.2738373
• Franke O., Durst K., Göken M.:
  Microstructure and local mechanical properties of Pt-modified nickel aluminides on nickel-base superalloys after thermo-mechanical fatigue
  In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 467 (2007), p. 15-23
  ISSN: 0921-5093
  DOI: 10.1016/j.msea.2007.02.069
• Franke O., Durst K., Maier V., Göken M., Birkholz T., Schneider H., Hennig F., Gelse K.:
  Mechanical properties of hyaline and repair cartilage studied by nanoindentation
  In: Acta Biomaterialia 3 (2007), p. 873-881
  ISSN: 1742-7061
  DOI: 10.1016/j.actbio.2007.04.005
• Li Y., Müller J., Höppel HW., Göken M., Blum W.:
  Deformation kinetics of nanocrystalline nickel
  In: Acta Materialia 55 (2007), p. 5708-5717
  ISSN: 1359-6454
  DOI: 10.1016/j.actamat.2007.06.036
• Maier HJ., Biallas G., Eggeler G., Estrin J., Hellmig RJ., Göken M., Höppel HW., Gottstein G., Winning M.:
  Symposium on ultrafine-grained materials: From basics to applications
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 38 (2007), p. 1881
  ISSN: 1073-5623
  DOI: 10.1007/s11661-007-9300-9
• May J., Dinkel M., Amberger D., Höppel HW., Göken M.:
  Mechanical properties, dislocation density and grain structure of ultrafine-grained aluminum and aluminum-magnesium alloys
  In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 38 (2007), p. 1941-1945
  ISSN: 1073-5623
  DOI: 10.1007/s11661-007-9110-0
• Ndlovu S., Durst K., Göken M.:
  Investigation of the sliding contact properties of WC-Co hard metals using nanoscratch testing
  In: Wear 263 (2007), p. 1602-1609
  ISSN: 0043-1648
  DOI: 10.1016/j.wear.2006.11.044
• Ndlovu S., Durst K., Höppel HW., Göken M.:
  Study on the local damage mechanisms in WC-Co hard metals during scratch testing
  In: Materials Research Society Symposium - Proceedings 1049 (2007), Article No.: 1049-AA05-16
  ISSN: 0272-9172
  DOI: 10.1557/PROC-1049-AA05-16
• Schweitzer E., Göken M.:
  In situ bulge testing in an atomic force microscope: Microdeformation experiments of thin film membranes
  In: Journal of Materials Research 22 (2007), p. 2902-2911
  ISSN: 0884-2914
  DOI: 10.1557/jmr.2007.0373
• Topic I., Höppel HW., Göken M.:
  Deformation behaviour, microstructure and processing of accumulative roll bonded aluminium alloy AA6016
  In: International Journal of Materials Research 98 (2007), p. 320-324
  ISSN: 1862-5282
  DOI: 10.3139/146.101469
• Wellmann P., Hens P., Sakwe A., Queren D., Müller R., Durst K., Göken M.:
  Impact of n-type versus p-type doping on mechanical properties and dislocation evolution during SiC crystal growth
  In: Materials Science Forum 556-557 (2007), p. 259-262
  ISSN: 0255-5476
  DOI: 10.4028/www.scientific.net/MSF.556-557.259